British Standards Institution documents within the Construction Information Service

• Energy performance of buildings - ventilation for buildings. Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
• Energy performance of buildings - ventilation for buildings. Interpretation of the requirements in EN 16798-13 - calculation of cooling systems (Module M4-8) - generation
• Energy performance of buildings - ventilation for buildings. Interpretation of the requirements in EN 16798-3 for non-residential buildings - performance requirements for ventilation and room-conditioning systems (modules M5-1, M5-4)
• Energy performance of buildings - Ventilation for buildings. Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5)
• Energy performance of buildings. Module M4-8 - calculation of cooling systems - generation
• Energy performance of lifts, escalators and moving walks. Energy calculation and classification for lifts (elevators) (+A1:2023)
• Energy performance of lifts, escalators and moving walks. Energy measurement and verification
• Engineering diagram drawing practice. Recommendations for general principles (AMD 8190) (partially superseded but remains current)
• Engineering diagram drawing practice. Recommendations for logic diagrams
• Engineering diagram drawing practice. Recommendations for mechanical/fluid flow diagrams
• Enhanced security performance requirements for doorsets and windows in the UK. Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk (+A1:2024)
• Entrance flooring systems - selection, installation and maintenance
• Environmental management - life cycle assessment - principles and framework (+A1:2020) (AMD Corrigendum 16558)
• Environmental management and circular economy - Sustainability and traceability of the recovery of secondary materials - Principles, requirements and guidance
• Environmental management systems - guidelines for using ISO 14001 to address environmental aspects and conditions within an environmental topic area
• Environmental management systems - Requirements with guidance for use (+A1:2024)
• Equipment for commercial kitchens - Components for ventilation in commercial kitchens. General requirements including calculation method
• Ergonomic design of control centres. Control room layout (AMD Corrigendum 12057)
• Ergonomic design of control centres. Layout and dimensions of workstations
• Ergonomic design of control centres. Principles for the design of control centres
• Ergonomic of human-system interaction. Workstation layout and postural requirements
• Ergonomic requirements for office work with visual display terminals (VDTs). Guidance on the work environment
• Ergonomics - Manual handling. Pushing and pulling (+A1:2022)
• Eurocode - Basis of structural and geotechnical design (Superseded but remains current)
• Eurocode - Basis of structural and geotechnical design. Assessment of existing structures
• Eurocode - Basis of structural and geotechnical design. New structures
• Eurocode - Basis of structural design (+A1:2005) (incorporating corrigendum December 2008 and April 2010) (Superseded but remains current)
• Eurocode 1 - Actions on structures. Accidental actions
• Eurocode 1 - Actions on structures. Actions on structures exposed to fire
• Eurocode 1 - Actions on structures. Atmospheric icing
• Eurocode 1 - Actions on structures. General actions - Accidental actions (+A1:2014) (incorporating corrigendum February 2010) (Superseded but remains current)
• Eurocode 1 - actions on structures. General actions - Snow loads (+A1:2015) (incorporating corrigenda December 2004 and March 2009) (Superseded but remains current)
• Eurocode 1 - Actions on structures. General actions - Thermal actions (incorporating corrigenda December 2004 and March 2009) (Superseded but remains current)
• Eurocode 1 - Actions on structures. Silos and tanks
• Eurocode 1 - Actions on structures. Silos and tanks (incorporating corrigenda November 2012, March 2013 and July 2013) (Superseded but remains current)
• Eurocode 1 - Actions on structures. Snow loads
• Eurocode 1 - Actions on structures. Specific weight of materials, self-weight of construction works and imposed loads for buildings
• Eurocode 1 - Actions on structures. Thermal actions
• Eurocode 1 - Actions on structures. Traffic loads on bridges and other civil engineering works
• Eurocode 1: actions on structures - traffic loads on bridges - track-bridge interaction
• Eurocode 1: Actions on structures. Actions induced by cranes and machinery (incorporating corrigenda December 2012 and March 2013)
• Eurocode 1: Actions on structures. General actions - Actions during execution (incorporating corrigenda July 2008, November 2012 and February 2013)
• Eurocode 1: Actions on structures. General actions - Actions on structures exposed to fire (incorporating corrigenda March 2009, November 2012 and February 2013) (Superseded but remains current)
• Eurocode 1: Actions on structures. General actions - Densities, self-weight, imposed loads for buildings (incorporating corrigenda December 2004 and March 2009) (Superseded but remains current)
• Eurocode 1: Actions on structures. General actions - Wind actions (+A1:2010) (incorporating corrigenda July 2009 and January 2010)
• Eurocode 1: Actions on structures. Traffic loads on bridges (incorporating corrigenda December 2004 and February 2010) (Superseded but remains current)
• Eurocode 2 - design of concrete structures. Design of fastenings for use in concrete
• Eurocode 2 - Design of concrete structures. General rules and rules for buildings, bridges and civil engineering structures
• Eurocode 2 - Design of concrete structures. Structural fire design
• Eurocode 2: Design of concrete structures. Concrete bridges - Design and detailing rules (incorporating corrigendum July 2008) (Superseded but remains current)
• Eurocode 2: Design of concrete structures. General rules - structural fire design (+A1:2019) (Incorporating corrigendum July 2008) (Superseded but remains current)
• Eurocode 2: Design of concrete structures. General rules and rules for buildings (+A1:2014) (incorporating corrigenda January 2008, November 2010 and January 2014) (Superseded but remains current)
• Eurocode 2: Design of concrete structures. Liquid retaining and containment structures (Superseded but remains current)
• Eurocode 3 - Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700 (incorporating corrigendum April 2009)
• Eurocode 3 - Design of steel structures. Beams with large web openings
• Eurocode 3 - Design of steel structures. Cold-formed members and sheeting
• Eurocode 3 - Design of steel structures. Design assisted by finite element analysis
• Eurocode 3 - Design of steel structures. Design of structures with tension components (incorporating corrigendum April 2009)
• Eurocode 3 - design of steel structures. General rules - supplementary rules for stainless steels (+A2:2020) (Superseded but remains current)
• Eurocode 3 - Design of steel structures. General rules and rules for buildings
• Eurocode 3 - Design of steel structures. Joints
• Eurocode 3 - Design of steel structures. Piling
• Eurocode 3 - Design of steel structures. Piling (incorporating corrigendum May 2009) (Superseded but remains current)
• Eurocode 3 - Design of steel structures. Plate assemblies with elements under transverse loads
• Eurocode 3 - Design of steel structures. Plated structural elements
• Eurocode 3 - design of steel structures. Plated structural elements (A2:2019) (Incorporating corrigendum April 2009) (Superseded but remains current)
• Eurocode 3 - Design of steel structures. Silos (+A1:2017) (incorporating corrigendum April 2009 and January 2011)
• Eurocode 3 - Design of steel structures. Stainless steel structures
• Eurocode 3 - Design of steel structures. Strength and stability of shell structures
• Eurocode 3 - Design of steel structures. Strength and stability of shell structures (+A1:2017) (Incorporating corrigenda April 2009 and December 2023) (Superseded but remains current)
• Eurocode 3 - Design of steel structures. Structural fire design
• Eurocode 3 - design of steel structures. Tanks (+A1:2017) (Incorporating corrigendum July 2009)
• Eurocode 3 - Design of steel structures. Towers, masts and chimneys
• Eurocode 3 - Design of steel structures. Towers, masts and chimneys - chimneys (Superseded but remains current)
• Eurocode 3 - Design of steel structures. Towers, masts and chimneys - towers and masts (incorporating corrigendum July 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. Alternative interaction method for members in bending and compression
• Eurocode 3: Design of steel structures. Crane supporting structures (incorporating corrigendum July 2009)
• Eurocode 3: Design of steel structures. Design of joints (incorporating corrigenda December 2005, September 2006, July 2009 and August 2010) (Superseded but remains current)
• Eurocode 3: Design of steel structures. Fatigue
• Eurocode 3: Design of steel structures. Fatigue (incorporating corrigenda December 2005, September 2006 and April 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. General rules - Structural fire design (incorporating corrigenda December 2005, September 2006 and March 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. General rules - Supplementary rules for cold-formed members and sheeting (incorporating corrigendum November 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. General rules and rules for buildings (+A1:2014) (incorporating corrigenda February 2006 and April 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. Material toughness and through-thickness properties
• Eurocode 3: Design of steel structures. Material toughness and through-thickness properties (incorporating corrigenda December 2005, September 2006 and March 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. Plated structures subject to out of plane loading (incorporating corrigendum April 2009) (Superseded but remains current)
• Eurocode 3: Design of steel structures. Steel bridges (incorporating corrigendum July 2009)
• Eurocode 4 - Design of composite steel and concrete structures. Bridges
• Eurocode 4 - Design of composite steel and concrete structures. Double and single skin steel concrete composite (SC) structures
• Eurocode 4 - Design of composite steel and concrete structures. General rules - Structural fire design (+A1:2014) (incorporating corrigenda July 2008 and August 2014) (Superseded but remains current)
• Eurocode 4 - Design of composite steel and concrete structures. General rules and rules for buildings
• Eurocode 4 - Design of composite steel and concrete structures. Structural fire design
• Eurocode 4: Design of composite steel and concrete structures. General rules and rules for bridges (incorporating corrigendum July 2008) (Superseded but remains current)
• Eurocode 4: Design of composite steel and concrete structures. General rules and rules for buildings (incorporating corrigendum April 2009) (Superseded but remains current)
• Eurocode 5 - Design of timber structures. Execution
• Eurocode 5 - Design of timber structures. General rules and rules for buildings
• Eurocode 5 - Design of timber structures. Structural fire design
• Eurocode 5: Design of timber structures - structural design of timber-concrete composite structures - common rules and rules for buildings
• Eurocode 5: Design of timber structures. Bridges
• Eurocode 5: Design of timber structures. General - Common rules and rules for buildings (+A2:2014) (incorporating corrigendum June 2006) (Superseded but remains current)