British Standards Institution documents within the Construction Information Service
- Eurocode 9 - Design of aluminium structures. Structural fire design
- Eurocode 9 - Design of aluminium structures. Structures susceptible to fatigue
- Eurocode 9: Design of aluminium structures. General structural rules (+A2:2013) (incorporating corrigendum March 2014) (Superseded but remains current)
- Eurocode 9: Design of aluminium structures. Shell structures (incorporating corrigendum November 2009) (Superseded but remains current)
- Eurocode 9: Design of aluminium structures. Structural fire design (incorporating corrigenda December 2008, March 2009 and October 2009) (Superseded but remains current)
- Eurocode 9: Design of aluminium structures. Structures susceptible to fatigue (+A1:2011) (Superseded but remains current)
- Evaluation and measurement for vibration in buildings. Guide to damage levels from groundborne vibration
- Execution of concrete structures (incorporating corrigenda October 2015 and November 2015)
- Execution of special geotechnical work - Displacement piles
- Execution of special geotechnical work - ground anchors
- Execution of special geotechnical work - grouting
- Execution of special geotechnical work - Sheet pile walls, combined pile walls, high modulus walls
- Execution of special geotechnical works - bored piles (+A1:2015)
- Execution of special geotechnical works - deep mixing (Incorporating corrigendum No. 1)
- Execution of special geotechnical works - diaphragm walls (+A1:2015)
- Execution of special geotechnical works - ground treatment by deep vibration
- Execution of special geotechnical works - micropiles
- Execution of special geotechnical works - Reinforced fill
- Execution of special geotechnical works - Soil nailing
- Execution of special geotechnical works - vertical drainage
- Execution of steel structures and aluminium structures - Reuse of structural steel
- Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components (+A1:2011)
- Execution of steel structures and aluminium structures. Technical requirements for aluminium structures
- Execution of steel structures and aluminium structures. Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications (Incorporating corrigendum March 2018)
- Execution of steel structures and aluminium structures. Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
- Execution of steel structures and aluminium structures. Technical requirements for steel structures (+A1:2011) (Withdrawn)
- Execution of steel structures and aluminium structures. Technical requirements for steel structures (+A1:2024)
- Explosive atmospheres - explosion prevention and protection. Basic concepts and methodology (Incorporating corrigendum October 2019)
- Explosive atmospheres. Classification of areas - Explosive dust atmospheres
- Explosive atmospheres. Classification of areas - explosive gas atmospheres
- Explosive atmospheres. Electrical installations design, selection and erection (incorporating corrigendum January 2016)
- Explosive atmospheres. Electrical installations inspection and maintenance
- Explosive atmospheres. Electrostatic hazards, guidance
- Explosive atmospheres. Equipment - General requirements (+A11:2024) (Incorporating corrigendum January 2020)
- Explosive atmospheres. Equipment protection by flameproof enclosures "d" (+A11:2024) (Incorporating corrigenda September 2018 and June 2020)
- Explosive atmospheres. Equipment protection by increased safety "e" (+A11:2024) (Incorporating corrigendum July 2019)
- Explosive atmospheres. Equipment protection by intrinsic safety "i"
- Explosive atmospheres. Equipment protection by intrinsic safety "i" (incorporating corrigenda January 2012 and November 2014) (Superseded but remains current)
- Explosive atmospheres. Equipment repair, overhaul and reclamation
- Explosive atmospheres. Equipment repair, overhaul and reclamation
- Explosive atmospheres. Gas detectors - selection, installation, use and maintenance of detectors for flammable gases and oxygen
- Extended application of results from fire resistance tests - Non-loadbearing walls. Glazed constructions
- Extended application of results from fire resistance tests - Non-loadbearing walls. Lightweight partitions (Incorporating corrigenda September 2020 and July 2025)
- Extended application of results from fire resistance tests for service installations. Combined penetration seals
- Extended application of results from fire resistance tests for service installations. Ducts (+A1:2017)
- Extended application of results from fire resistance tests for service installations. Fire dampers
- Extended application on the fire performance of construction products and building elements: Principle of EXAP standards and EXAP reports
- Extended application reports on the fire performance of construction products and building elements (Incorporating corrigendum January 2012) (Withdrawn)
- Extended applications of results from fire resistance tests for service installations. Penetration seals
- External blinds and awnings - performance requirements including safety (Incorporating corrigendum March 2016)
- External timber cladding. Method of specifying
- Fabrics for curtains, drapes and window blinds. Flammability requirements - Specification
- Facilities maintenance management - code of practice
- Facility management - Management systems - Requirements with guidance for use (+A1:2024) (Incorporating corrigendum May 2018)
- Facility management - Vocabulary
- Falsework - Performance requirements and general design
- Fasteners - electroplated coating systems (+A1:2026) (Incorporating corrigendum November 2022)
- Fasteners - Hexagon regular nuts (style 1)
- Fasteners - mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs with specified grades and property classes
- Fasteners - mechanical properties of corrosion-resistant stainless steel fasteners. Nuts with specified grades and property classes
- Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel. Nuts with specified property classes
- Fences. Specification for anti-intruder fences in chain link and welded mesh
- Fences. Specification for chain link fences
- Fences. Specification for close-boarded fences and wooden palisade fences (+A1:2018)
- Fences. Specification for electric security fences - design, installation and maintenance
- Fences. Specification for free-standing temporary steel mesh perimeter fencing panels
- Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles
- Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals
- Fences. Specification for open mesh steel panel
- Fences. Specification for prefabricated wood panel fences (+A1:2018)
- Fences. Specification for strained wire and wire mesh netting fences
- Fences. Specification for wooden post and rail fences (+A1:2018)
- Fences. Steel palisade fences - manufacturing and installation - specification
- Fibre-cement flat sheets - product specification and test methods (+A2:2018)
- Fibres for concrete. Polymer fibres - Definitions, specifications and conformity
- Fibres for concrete. Steel fibres - Definitions, specifications and conformity
- Fire - Vocabulary
- Fire - Vocabulary (Withdrawn)
- Fire and explosion precautions at premises handling flammable gases, liquids and dusts. Guide to applicable standards and regulations
- Fire classification of construction products and building elements. Classification using data from external fire exposure to roof tests
- Fire classification of construction products and building elements. Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
- Fire classification of construction products and building elements. Classification using data from fire resistance tests on components of smoke control systems
- Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers (+A1:2009) (Withdrawn)
- Fire classification of construction products and building elements. Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ventilation ducts and fire dampers and/or power, control and communication cables
- Fire classification of construction products and building elements. Classification using data from fire resistance tests, excluding ventilation services (Withdrawn)
- Fire classification of construction products and building elements. Classification using data from reaction to fire tests
- Fire classification of construction products and building elements. Classification using data from reaction to fire tests (+A1:2009) (Withdrawn)
- Fire classification of construction products and building elements. Classification using data from reaction to fire tests on power, control and communication cables (+A1:2022)
- Fire detection and alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of voice alarm systems (Withdrawn)
- Fire detection and alarm systems for buildings. Specification for automatic release mechanisms for certain fire protection equipment (AMD 10207) (AMD 17256)
- Fire detection and alarm systems for buildings. Specification for manual call points (AMD 4685) (AMD 5085) (Withdrawn)
- Fire detection and fire alarm devices for dwellings. Specification for heat alarms
- Fire detection and fire alarm devices for dwellings. Specification for multi-sensor fire alarms using any combination of smoke, heat and carbon monoxide sensors
- Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises (Incorporating Corrigendum No. 1) (Withdrawn)
- Fire detection and fire alarm systems for buildings. Code of practice for system design, installation, commissioning and maintenance (AMD 15447) (+A2:2008) (Withdrawn)
- Fire detection and fire alarm systems for buildings. Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings (Withdrawn)
- Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems
- Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems (Withdrawn)
- Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises (+A1:2020)
- Fire detection and fire alarm systems for buildings. Design, installation, commissioning and maintenance of systems in non-domestic premises - Code of practice