British Standards Institution documents within the Construction Information Service
- Drain and sewer systems outside buildings. Generalities and definitions (Withdrawn)
- Drain and sewer systems outside buildings. Hydraulic design and environmental considerations (AMD Corrigendum 15442) (Withdrawn)
- Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity (AMD 16109) (AMD Corrigendum 16739)
- Drilling and foundation equipment - safety. Common requirements (+A1:2021)
- Drilling and foundation equipment - safety. Mobile drill rigs for civil and geotechnical engineering, quarrying and mining (+A1:2021)
- Dry fixed ridge, hip and verge systems for slating and tiling - specification
- Ductile iron pipelines - hydrostatic testing after installation
- Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories. Epoxy coating (heavy duty) (+A1:2019)
- Ductile iron pipes, fittings, accessories and their joints for sewerage applications - requirements and test methods (+A1:2009)
- Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
- Durability of wood and wood-based products - testing and classification of the durability to biological agents of wood and wood-based materials
- Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
- Earthing of power installations exceeding 1 kV a.c. (+A1:2024)
- Earthworks. Alternative materials in earthworks
- Earthworks. Classification of materials
- Earthworks. Construction procedures
- Earthworks. Hydraulic placement of extractive waste
- Earthworks. Land reclamation earthworks using dredged hydraulic fill
- Earthworks. Principles and general rules
- Earthworks. Quality control
- Earthworks. Soil treatment with lime and/or hydraulic binders
- Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications. Thermoplastic elastomers (Incorporating amendments nos. 1 and 2 and corrigendum no. 1)
- Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber (AMD 10214) (AMD 13706) (AMD Corrigendum 14178) (AMD 15832)
- Electric cables - Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV - Requirements and test methods (incorporating Corrigenda Nos. 1 and 2)
- Electric cables - armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire - Requirements and test methods (incorporating corrigendum No.1)
- Electric cables - Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses - General
- Electric cables - Calculation of the current rating. Sections on operating conditions - Cables crossing external heat sources
- Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. General guidance
- Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V. Specific guidance related to EN 50525 cable types
- Electric cables - low voltage energy cables of rated voltages up to and including 450/750 V. General requirements (+A1:2022)
- Electric cables - PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting (+A1:2020)
- Electric cables - specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire. Multicore cables (+A1:2019)
- Electric cables - specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids - multicore cables
- Electric cables - thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations - specification (incorporating corrigendum No. 1)
- Electric cables - thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire - specification (incorporating corrigenda Nos. 1 and 2)
- Electric cables - thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000V for fixed installations, having low emission of smoke and corrosive gases when affected by fire - specification
- Electrical accessories - circuit-breakers for overcurrent protection for household and similar installations. Circuit-breakers for a.c. and d.c. operation
- Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations. Circuit-breakers for a.c. operation (+A11:2024)
- Electrical apparatus for the detection of carbon monoxide in domestic premises, caravans and boats - Guide on the selection, installation, use and maintenance
- Electrical earthing. Clamps for earthing and bonding. Specification
- Electrical energy storage (EES) systems. Unit parameters and testing methods - General specification
- Electrical equipment for measurement, control and laboratory use - EMC requirements. General requirements (Incorporating Corrigendum August 2021)
- Electrical installations - Protection against fire of battery energy storage systems for use in dwellings - Specification
- Electrical resistance trace heating systems for industrial and commercial applications. Application guide for system design, installation and maintenance
- Electrical resistance trace heating systems for industrial and commercial applications. General and testing requirements
- Electrical systems in furniture - specification
- Electroacoustics - hearing aids. Induction-loop systems for hearing aid purposes - system performance requirements (+A1:2018)
- Electromagnetic compatibility (EMC). Generic standards - Emission standard for industrial environments (IEC 61000-6-4:2018)
- Electromagnetic compatibility (EMC). Generic standards - immunity for residential, commercial and light-industrial environments (Incorporating corrigendum March 2019)
- Electromagnetic compatibility (EMC). Generic standards - immunity standard for industrial environments (Incorporating corrigendum March 2019)
- Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Earthing and cabling
- Electromagnetic compatibility (EMC). Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A
- Electromagnetic compatibility (EMC). Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (+A2:2024) (Incorporating corrigendum August 2021)
- Electrostatics. Protection of electronic devices from electrostatic phenomena - General requirements
- Emergency escape lighting systems (AMD 16566) (BS EN 50172:2004, BS 5266-8:2004) (Superseded but remains current)
- Emergency escape lighting systems (BS EN 50172:2024, BS 5266-8:2024)
- Emergency lighting. Code of practice for electrical low mounted way guidance systems for emergency use (Withdrawn)
- Emergency lighting. Code of practice for the emergency lighting of premises
- Emergency safety showers. Water overhead body showers for sites other than laboratories
- Energy audits. Buildings
- Energy audits. General requirements
- Energy audits. Processes
- Energy audits. Transport
- Energy efficiency classes for technical insulation systems - Calculation method and applications
- Energy management systems - Requirements for bodies providing audit and certification of energy management systems
- Energy management systems - Requirements with guidance for use (+A1:2024) (Incorporating corrigendum February 2025)
- Energy performance of building systems - Underfloor air distribution systems. General overview
- Energy performance of buildings - Contribution of building automation, controls and building management. General framework and procedures (Incorporating corrigendum September 2022)
- Energy performance of buildings - energy requirements and efficiencies of heating, cooling and domestic hot water (DHW) distribution systems. Calculation procedures
- Energy performance of buildings - energy requirements for lighting. Specifications, module M9 (+A1:2021)
- Energy performance of buildings - indoor environmental quality. Indoor environmental input parameters for the design and assessment of energy performance of buildings
- Energy performance of buildings - method for calculation of system energy requirements and system efficiencies. District heating and cooling, module M3-8-5, M4-8-5, M8-8-5, M11-8-5
- Energy performance of buildings - method for calculation of system energy requirements and system efficiencies. Heat generation systems, thermal solar and photovoltaic systems, module M3-8-3, M8-8-3, M11-8-3
- Energy performance of buildings - method for calculation of system energy requirements and system efficiencies. Space heating and DHW generation systems, combustion systems (boilers, biomass), module M3-8-1, M8-8-1
- Energy performance of buildings - method for calculation of system energy requirements and system efficiencies. Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), module M3-8-8
- Energy performance of buildings - method for calculation of system energy requirements and system efficiencies. Space heating generation systems, heat pump systems, module M3-8-2, M8-8-2 (Incorporating corrigendum October 2017)
- Energy performance of buildings - method for calculation of the design heat load. Domestic hot water systems heat load and characterisation of needs, module M8-2, M8-3
- Energy performance of buildings - method for calculation of the design heat load. Explanation and justification of EN 12831-1, module M3-3
- Energy performance of buildings - method for calculation of the design heat load. Space heating load, module M3-3
- Energy performance of buildings - thermal, solar and daylight properties of building components and elements. Explanation and justification
- Energy performance of buildings - thermal, solar and daylight properties of building components and elements. Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing
- Energy performance of buildings - ventilation for buildings. Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9) - general
- Energy performance of buildings - ventilation for buildings. Calculation methods for energy requirements of ventilation and air conditioning systems (modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - method 1: distribution and generation
- Energy performance of buildings - ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5)
- Energy performance of buildings - ventilation for buildings. Calculation of cooling systems (Module M4-7) - storage
- Energy performance of buildings - ventilation for buildings. For non-residential buildings - performance requirements for ventilation and room-conditioning systems (Modules M5-1, M5-4)
- Energy performance of buildings - ventilation for buildings. Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics - Module M1-6
- Energy performance of buildings - ventilation for buildings. Interpretation of the requirements in EN 16798-13 - calculation of cooling systems (Module M4-8) - generation
- Energy performance of buildings - ventilation for buildings. Interpretation of the requirements in EN 16798-3 for non-residential buildings - performance requirements for ventilation and room-conditioning systems (modules M5-1, M5-4)
- Energy performance of buildings. Module M4-8 - calculation of cooling systems - generation
- Energy performance of lifts, escalators and moving walks. Energy calculation and classification for lifts (elevators) (+A1:2023)
- Energy performance of lifts, escalators and moving walks. Energy measurement and verification
- Engineering diagram drawing practice. Recommendations for general principles (AMD 8190) (partially superseded but remains current)
- Engineering diagram drawing practice. Recommendations for logic diagrams
- Engineering diagram drawing practice. Recommendations for mechanical/fluid flow diagrams
- Enhanced security performance requirements for doorsets and windows in the UK. Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk (+A1:2024)
- Entrance flooring systems - selection, installation and maintenance
- Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (+A1:2021)
- Environmental management - life cycle assessment - principles and framework (+A1:2020) (AMD Corrigendum 16558)
- Environmental management - Life cycle assessment - Requirements and guidelines (+A2:2020) (Incorporating corrigendum May 2018)