British Standards Institution documents within the Construction Information Service
- Code of practice for safe use of cranes. Hydraulic gantry lifting systems
- Code of practice for safe use of cranes. Inspection, maintenance and thorough examination - bridge and gantry cranes, including light crane systems (+A2:2022)
- Code of practice for safe use of cranes. Inspection, maintenance and thorough examination - General
- Code of practice for safe use of cranes. Inspection, maintenance and thorough examination - Loader cranes
- Code of practice for safe use of cranes. Lorry loaders
- Code of practice for safe use of cranes. Mobile cranes (+A1:2019)
- Code of practice for safe use of cranes. Tower cranes
- Code of practice for safety barriers used in traffic management within workplace environments with test methods for safety barrier impact resilience
- Code of practice for selection and installation of post-installed anchors in concrete and masonry (+A1:2021)
- Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace
- Code of practice for site investigations (+A2:2010) (Withdrawn)
- Code of practice for slating and tiling (including shingles) (+A1:2010) (Withdrawn)
- Code of practice for strengthened/reinforced soils and other fills (+A1:2016)
- Code of practice for strengthened/reinforced soils. Soil nail design (+A1:2017)
- Code of practice for surface water management for development sites
- Code of practice for temporary works procedures and the permissible stress design of falsework
- Code of practice for the design and installation of drainage fields for use in wastewater treatment (+A1:2008) (incorporating corrigendum No.1)
- Code of practice for the design and installation of natural stone cladding and lining. General (Withdrawn)
- Code of practice for the design and installation of natural stone cladding and lining. Traditional handset external cladding (Withdrawn)
- Code of practice for the design of buildings incorporating safe work at height (+A1:2018)
- Code of practice for the design of protective measures for methane and carbon dioxide ground gases for new buildings (+A1:2019)
- Code of practice for the design of road lighting. Lighting of tunnels
- Code of practice for the design of stairs for limited access
- Code of practice for the design, planning, installation, testing and maintenance of sound systems
- Code of practice for the installation, maintenance, thorough examination and safe use of mast climbing work platforms (MCWPs)
- Code of practice for the management of geotechnical data for ground engineering projects
- Code of practice for the operation of fire protection measures. Actuation of release mechanisms for doors (+A2:2023)
- Code of practice for the operation of fire protection measures. Electrical actuation of gaseous total flooding extinguishing systems (Amendment No.1)
- Code of practice for the operation of fire protection measures. Electrical actuation of pre-action watermist and sprinkler systems
- Code of practice for the operation of fire protection measures. Fire detection and fire alarm systems - interface with ancillary systems and equipment
- Code of practice for the preparation, commissioning and maintenance of domestic central heating and cooling water systems
- Code of practice for the safe use of cranes. Inspection, maintenance and thorough examination - Cargo handling and container cranes
- Code of practice for the safe use of MEWPs
- Code of practice for the sampling and monitoring of hot and cold water services in buildings
- Code of practice for the structural use of timber. Fire resistance of timber structures. Method of calculating fire resistance of timber members (AMD 2947) (AMD 6192) (Withdrawn)
- Code of practice for the use of masonry. Structural use of reinforced and prestressed masonry (incorporating Corrigendum No.1) (Withdrawn)
- Code of practice for the use of masonry. Structural use of reinforced and prestressed masonry (Withdrawn)
- Code of practice for the use of profiled sheet for roof and wall cladding on buildings (+A1:2017)
- Code of practice for the use of rope access methods for industrial purposes - recommendations and guidance supplementary to BS ISO 22846
- Code of practice for use of masonry. Materials and components, design and workmanship (incorporating Corrigendum No.1) (Withdrawn)
- Code of practice for use of masonry. Materials and components, design and workmanship (Withdrawn)
- Code of practice for use of masonry. Structural use of unreinforced masonry (AMD 7745) (AMD 13680) (Withdrawn)
- Code of practice for use of masonry. Structural use of unreinforced masonry (incorporating Corrigendum No.1) (Withdrawn)
- Code of practice for ventilation principles and designing for natural ventilation (AMD 8930)
- Cold formed welded steel structural hollow sections. Tolerances, dimensions and sectional properties
- Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery conditions (Incorporating corrigendum April 2018)
- Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
- Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
- Collaborative business relationship management - guidelines for large organizations seeking collaboration with micro, small and medium-sized enterprises (MSMEs)
- Collaborative business relationship management systems - guidelines on the implementation of ISO 44001
- Collaborative business relationship management systems - Requirements and framework (+A1:2024)
- Commentary on corrosion at bimetallic contacts and its alleviation
- Common rules for precast concrete products
- Compliance management systems - requirements with guidance for use
- Components for residential sprinkler systems - specification and test methods for residential sprinklers
- Components for smoke and heat control systems. Code of practice on functional recommendations and calculation methods for smoke and heat control systems for covered car parks
- Components for smoke and heat control systems. Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires - Code of practice
- Components for smoke control systems. Code of practice for planning, design, installation, commissioning and maintenance
- Composite doorsets. Domestic external doorsets - Specification
- Concrete - complementary British Standard to BS EN 206. Method of specifying and guidance for the specifier
- Concrete - complementary British Standard to BS EN 206. Specification for constituent materials and concrete
- Concrete - Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier (+A1:2012) (incorporating corrigendum No. 1) (Withdrawn)
- Concrete - Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier (AMD 14639) (Withdrawn)
- Concrete - Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete (+A1:2012) (incorporating corrigendum No. 1) (Withdrawn)
- Concrete - Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete (AMD 14640) (Withdrawn)
- Concrete - specification, performance, production and conformity (+A2:2021)
- Concrete kerb units - Requirements and test methods (AMD Corrigendum 16468)
- Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced (incorporating corrigenda December 2003, December 2006 and April 2008)
- Concrete pavements. Functional requirements for concrete pavements
- Concrete pavements. Materials
- Concrete pavements. Specification for dowels to be used in concrete pavements
- Concrete paving blocks - Requirements and test methods (AMD 16470)
- Concrete paving flags - Requirements and test methods (AMD Corrigendum 16467)
- Concrete pipes and ancillary concrete products - concrete manholes, inspection chambers and soakaways (complementary to BS EN 1917:2002) - specification
- Concrete pipes and ancillary concrete products. Road gullies and gully cover slabs - specification
- Concrete pipes and ancillary concrete products. Specification for unreinforced and reinforced concrete inspection chambers (complementary to BS EN 1917:2002) (AMD 15038) (+A2:2010) (Withdrawn)
- Concrete pipes and ancillary concrete products. Specification for unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) (+A2:2010) (Withdrawn)
- Concrete pipes and ancillary concrete. Unreinforced and reinforced concrete pipes (including jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002) - specification
- Concrete pipes and fittings, unreinforced, steel fibre and reinforced (incorporating corrigenda December 2003, December 2006 and April 2008)
- Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications (+A1:2017)
- Concrete roofing tiles and fittings for roof covering and wall cladding - Test methods
- Concrete. Guide to specifying concrete (AMD 10364) (AMD 13876) (AMD Corrigendum 14163) (Withdrawn)
- Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete (AMD 6928) (AMD 8760) (AMD 9313) (AMD 10367) (AMD 10611) (Withdrawn)
- Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables. General requirements (Incorporating corrigendum August 2023)
- Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables. Polyethylene (PE), polypropylene (PP) or unplasticized poly(vinyl chloride) (PVC-U) conduit systems - Requirements for solid wall conduits, fittings and the system used in special applications
- Conduit systems for cable management. General requirements (+A1:2019)
- Conduit systems for cable management. Particular requirements - rigid conduit systems (+A11:2021)
- Conduit systems for cable management. Particular requirements. Conduit systems buried underground (incorporating corrigendum November 2010) (Superseded but remains current)
- Conformity assessment - General requirements for bodies operating certification of persons
- Conformity assessment - Requirements for bodies certifying products, processes and services
- Conformity assessment - requirements for bodies providing audit and certification of management systems. Requirements
- Connected and automated plant (CAP) - Defining and specifying the use of CAP in construction and maintenance works for the purposes of procurement and deployment - Specification
- Connectivity for lighting systems
- Conservation and care of archive and library collections
- Conservation of cultural heritage - guidelines for improving the energy performance of historic buildings
- Conservation of cultural heritage - specifications for location, construction and modification of buildings or rooms intended for the storage or use of heritage collections
- Conservation of cultural property - condition survey and report of built cultural heritage
- Construction and testing of drains and sewers
- Construction drawings - designation systems. Buildings and parts of buildings
- Construction drawings - designation systems. Room identifiers