British Standards Institution documents within the Construction Information Service
- Flanges and their joints - circular flanges for pipes, valves, fittings and accessories, PN designated. Steel flanges (Incorporating corrigendum August 2019)
- Flanges and their joints - Design rules for gasketed circular flange connections. Calculation
- Flanges and their joints. Qualification of personnel competency in the assembly of the bolted connections of critical service pressurized systems
- Flat roofs with continuously supported coverings - Code of practice (Withdrawn)
- Flat roofs with continuously supported flexible waterproof coverings - code of practice
- Flexible sheets for waterproofing - definitions and characteristics of underlays. Underlays for walls
- Flexible sheets for waterproofing - determination of foldability at low temperature. Plastic and rubber sheets for roof waterproofing
- Flexible sheets for waterproofing - determination of peel resistance of joints. Plastic and rubber sheets for roof waterproofing
- Flexible sheets for waterproofing - plastic and rubber damp proof courses - definitions and characteristics
- Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics (+A1:2017)
- Flexible sheets for waterproofing - plastic and rubber sheets for roof waterproofing - definitions and characteristics
- Flexible sheets for waterproofing - plastic and rubber vapour control layers - definitions and characteristics
- Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of shear resistance of joints
- Flexible sheets for waterproofing. Determination of peel resistance of joints. Bitumen sheets for roof waterproofing
- Flood resilient construction - Improving the flood performance of buildings - Guide
- Flood resistance products. Building products - specification (+A1:2021)
- Flood resistance products. Perimeter barrier systems - specification (+A1:2021)
- Flooring, stair treads and handrails for industrial use. Common design requirements and recommendations for installation (+A1:2012)
- Flow measurement structures - rectangular, trapezoidal and U-shaped flumes
- Flueing and ventilation for gas appliances of rated input not exceeding 70 kW net (1st, 2nd and 3rd family gases). Specification for the installation and maintenance of ventilation provision for gas appliances (Withdrawn)
- Framework for artificial intelligence (AI) systems using machine learning (ML)
- Framework for implementing the principles of the circular economy in organizations - guide
- Free-standing chimneys. Steel liners - Design and execution
- Fully enclosed play facilities - code of practice
- Fume cupboards. On-site test methods (Incorporating corrigenda January 2014, August 2024 and January 2025)
- Fume cupboards. Recommendations for installation and maintenance (Incorporating corrigenda January 2014, August 2024 and January 2025)
- Fume cupboards. Safety and performance requirements (Incorporating corrigenda April 2007, January 2014, August 2024 and January 2025)
- Fume cupboards. Type test methods (Incorporating corrigenda June 2019, August 2024 and January 2025)
- Fume cupboards. Variable air volume fume cupboards (Incorporating corrigenda January 2014, August 2024 and January 2025)
- Fume cupboards. Vocabulary (Incorporating corrigenda April 2007, January 2014, August 2024, January 2025 and February 2025)
- Functional safety - Safety instrumented systems for the process industry sector. Framework, definitions, system, hardware and application programming requirements (+A1:2017)
- Functional safety - safety instrumented systems for the process industry sector. Guidance for the determination of the required safety integrity levels
- Functional safety - safety instrumented systems for the process industry sector. Guidelines for the application of IEC 61511-1 (IEC 61511-2:2016)
- Furniture - chairs and tables for educational institutions. Functional dimensions (incorporating corrigendum August 2016)
- Further guidance on the application of EN 13791:2019 and background to the provisions
- Gaps, gates and stiles - specification
- Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Detailed functional requirements for design, materials, construction, inspection and testing
- Gas supply - gas pipework for buildings - maximum operating pressure less than or equal to 5 bar - functional recommendations
- Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Detailed functional requirements for commissioning, operation and maintenance
- Gas-fired central heating boilers. Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kW (+A1:2023) (Incorporating corrigendum December 2024)
- Gas-fired heating boilers. General requirements and tests (+A1:2023) (Incorporating corrigendum September 2022)
- General introduction to standards for preparation of steel substrates before application of paints and related products
- General requirements for components used in drains and sewers
- General requirements for electrical accessories - specification (+A1:2014)
- General requirements for lighting systems - safety
- General requirements for the competence of testing and calibration laboratories (Incorporating corrigenda March and June 2018)
- Geosynthetic barriers - characteristics required for use in the construction of canals
- Geosynthetic barriers - characteristics required for use in the construction of reservoirs and dams (Incorporating corrigendum August 2018)
- Geotechnical investigation and testing - field testing. Borehole dynamic probing
- Geotechnical investigation and testing - field testing. Borehole jack test
- Geotechnical investigation and testing - Field testing. Electrical cone and piezocone penetration test
- Geotechnical investigation and testing - field testing. Field vane test (FVT and FVT-F)
- Geotechnical investigation and testing - field testing. Flexible dilatometer test
- Geotechnical investigation and testing - field testing. Full displacement pressuremeter test (ISO 22476-8:2018)
- Geotechnical investigation and testing - field testing. Measuring while drilling (ISO 22476-15:2016)
- Geotechnical investigation and testing - field testing. Prebored pressuremeter test by Ménard procedure
- Geotechnical investigation and testing - field testing. Self-boring pressuremeter test (ISO 22476-6:2018)
- Geotechnical investigation and testing - geohydraulic testing. General rules
- Geotechnical investigation and testing - geohydraulic testing. Infiltrometer tests
- Geotechnical investigation and testing - geohydraulic testing. Pumping tests
- Geotechnical investigation and testing - Geohydraulic testing. Water permeability tests in a borehole using open systems
- Geotechnical investigation and testing - geohydraulic testing. Water pressure tests in rock
- Geotechnical investigation and testing - geotechnical monitoring by field instrumentation. General rules
- Geotechnical investigation and testing - geotechnical monitoring by field instrumentation. Measurement of displacements across a line: inclinometers (+A1:2020)
- Geotechnical investigation and testing - geotechnical monitoring by field instrumentation. Measurement of displacements along a line: extensometers
- Geotechnical investigation and testing - geotechnical monitoring by field instrumentation. Measurement of pore water pressure: Piezometers
- Geotechnical investigation and testing - identification and classification of soil. Identification and description (ISO 14688-1:2017)
- Geotechnical investigation and testing - identification and classification of soil. Principles for a classification (ISO 14688-2:2017)
- Geotechnical investigation and testing - identification, description and classification of rock (ISO 14689:2017)
- Geotechnical investigation and testing - Laboratory testing of soil. Consolidated triaxial compression tests on water saturated soils
- Geotechnical investigation and testing - laboratory testing of soil. Determination of bulk density
- Geotechnical investigation and testing - laboratory testing of soil. Determination of liquid and plastic limits (+A2:2022)
- Geotechnical investigation and testing - laboratory testing of soil. Determination of particle density
- Geotechnical investigation and testing - laboratory testing of soil. Determination of particle size distribution (ISO 17892-4:2016)
- Geotechnical investigation and testing - Laboratory testing of soil. Determination of water content (+A1:2022)
- Geotechnical investigation and testing - Laboratory testing of soil. Direct shear tests
- Geotechnical investigation and testing - laboratory testing of soil. Fall cone test (ISO 17892-6:2017)
- Geotechnical investigation and testing - laboratory testing of soil. Incremental loading oedometer test (ISO 17892-5:2017)
- Geotechnical investigation and testing - laboratory testing of soil. Permeability tests
- Geotechnical investigation and testing - laboratory testing of soil. Unconfined compression test (ISO 17892-7:2017)
- Geotechnical investigation and testing - laboratory testing of soil. Unconsolidated undrained triaxial test
- Geotechnical investigation and testing - qualification criteria and assessment. Qualified technician and qualified operator
- Geotechnical investigation and testing - sampling methods and groundwater measurements. Technical principles for the sampling of soil, rock and groundwater
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of grouted anchors
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of piles: dynamic load testing
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of piles: rapid load testing (ISO 22477-10:2016)
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of piles: static compression load testing (ISO 22477-1:2018) (Incorporating corrigendum August 2019)
- Geotechnical investigation and testing - Testing of geotechnical structures. Testing of piles: static load testing
- Geotechnical investigation and testing. Field testing. Dynamic probing (+A1:2011) (incorporating corrigendum February 2007)
- Geotechnical investigation and testing. Field testing. Mechanical cone penetration test (CPTM)
- Geotechnical investigation and testing. Field testing. Standard penetration test (+A1:2011) (incorporating corrigendum February 2007)
- Geotextiles - guidance for specification for basic separation and filtration functions
- Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
- Geotextiles and geotextile-related products - characteristics required for use in earthworks, foundations and retaining structures
- Geotextiles and geotextile-related products - characteristics required for use in erosion control works (coastal protection, bank revetments)
- GIS (geospatial) / BIM interoperability
- Glass for glazing. Classification
- Glass in building - Coated glass. Product standard
- Glass in building - Determination of luminous and solar characteristics of glazing
- Glass in building - determination of the lateral load resistance of glass panes by calculation