British Standards Institution documents within the Construction Information Service
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of piles: rapid load testing (ISO 22477-10:2016)
- Geotechnical investigation and testing - testing of geotechnical structures. Testing of piles: static compression load testing (ISO 22477-1:2018) (Incorporating corrigendum August 2019)
- Geotechnical investigation and testing - Testing of geotechnical structures. Testing of piles: static load testing
- Geotechnical investigation and testing. Field testing. Dynamic probing (+A1:2011) (incorporating corrigendum February 2007)
- Geotechnical investigation and testing. Field testing. Mechanical cone penetration test (CPTM)
- Geotechnical investigation and testing. Field testing. Standard penetration test (+A1:2011) (incorporating corrigendum February 2007)
- Geotextiles - guidance for specification for basic separation and filtration functions
- Geotextiles and geotextile-related products - characteristics required for use in earthworks, foundations and retaining structures
- Geotextiles and geotextile-related products - characteristics required for use in erosion control works (coastal protection, bank revetments)
- GIS (geospatial) / BIM interoperability
- Glass for glazing. Classification
- Glass in building - coated glass. Definitions and classification
- Glass in building - curved glass. Quality requirements
- Glass in building - Determination of luminous and solar characteristics of glazing
- Glass in building - determination of the lateral load resistance of glass panes by calculation
- Glass in building - heat soaked thermally toughened soda lime silicate safety glass. Definition and description
- Glass in building - heat strengthened soda lime silicate glass. Evaluation of conformity/product standard
- Glass in building - laminated glass and laminated safety glass. Appearance
- Glass in building - Laminated glass and laminated safety glass. Evaluation of conformity/product standard
- Glass in building - laminated glass and laminated safety glass. Laminated safety glass
- Glass in building - Pendulum test - Impact test method and classification for flat glass (incorporating corrigendum April 2010)
- Glass in building - Security glazing - testing and classification of resistance against manual attack
- Glass in building - thermally toughened soda lime silicate safety glass. Definition and description (+A1:2019)
- Glass in buildings - heat strengthened soda lime silicate glass. Definition and description
- Glazing for buildings - Code of practice for energy, light and sound
- Glazing for buildings - Code of practice for fire, security and wind loading
- Glazing for buildings - Code of practice for safety related to human impact (Withdrawn)
- Glazing for buildings - Code of practice for special applications
- Glazing for buildings. Code of practice for safety related to human impact (Incorporating corrigendum No. 1)
- Glazing for buildings. Code of practice for the provision of information
- Glazing for buildings. General methodology for the selection of glazing
- Glossary of building and civil engineering terms - vocabulary. Civil engineering - water engineering, environmental engineering and pipelines
- Graphic symbols and abbreviations for fire protection drawings
- Graphical symbols - Registered public information symbols (+A1:2026)
- Graphical symbols - Safety colours and safety signs - Registered safety signs (+A8:2024) (Incorporating corrigendum July 2020)
- Graphical symbols - safety colours and safety signs. Colorimetric and photometric properties of safety sign materials
- Graphical symbols - Safety colours and safety signs. Design principles for graphical symbols for use in safety signs
- Graphical symbols - Safety colours and safety signs. Design principles for safety signs and safety markings
- Graphical symbols for diagrams. General rules
- Graphical symbols for diagrams. Graphical symbols
- Gravity drainage systems inside buildings. General and performance requirements
- Gravity drainage systems inside buildings. Installation and testing, instructions for operation, maintenance and use
- Gravity drainage systems inside buildings. Roof drainage, layout and calculation (AMD 17041)
- Gravity drainage systems inside buildings. Sanitary pipework, layout and calculation
- Gravity drainage systems inside buildings. Wastewater lifting plants - layout and calculation
- Grease separators. Principles of design, performance and testing, marking and quality control (AMD Corrigendum 16957)
- Grease separators. Selection of nominal size, installation, operation and maintenance
- Ground granulated blast furnace slag for use in concrete, mortar and grout. Assessment and verification of constancy of performance
- Ground granulated blastfurnace slag for use in concrete, mortar and grout - definitions, specifications and conformity criteria (includes corrigendum 16763)
- Ground limestone for use in concrete, mortar and grout - Definition, specifications and conformity criteria
- Grounds maintenance. Recommendations for establishing and managing grounds maintenance organisations and for design considerations related to maintenance
- Grounds maintenance. Recommendations for maintenance of amenity and functional turf (other than sports turf)
- Grounds maintenance. Recommendations for maintenance of soft landscape
- Grounds maintenance. Recommendations for the maintenance of hard areas (excluding sports surfaces)
- Grout for prestressing tendons - Test methods
- GRP tanks and vessels for use above ground. Design and workmanship
- Guidance and recommendations on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (+A1:2026)
- Guidance for arc welding of reinforcing steel
- Guidance for the selection and use of safety signs and fire safety notices (+A1:2023)
- Guidance for the selection of high-voltage A.C. cable systems
- Guidance on investigations for ground gas - Permanent gases and volatile organic compounds (VOCs)
- Guidance on social responsibility
- Guidance on sound insulation and noise reduction for buildings
- Guidance on the new European Standards for thermal insulation materials
- Guidance on the use of BS EN 13108, Bituminous mixtures (Incorporating Corrigendum No. 1)
- Guidance on the use of BS EN 40-3-1 and BS EN 40-3-3
- Guide for life cycle costing of maintenance during the in use phases of buildings
- Guide for security of buildings against crime. Dwellings
- Guide for security of buildings against crime. Offices and shops
- Guide to durability of buildings and building elements, products and components
- Guide to ergonomics principles in the design and selection of office furniture (AMD 16084)
- Guide to evaluation of human exposure to vibration in buildings. Blast-induced vibration
- Guide to evaluation of human exposure to vibration in buildings. Vibration sources other than blasting
- Guide to fatigue design and assessment of steel products (+A1:2015)
- Guide to installation and use of valves (AMD 6604)
- Guide to methods for assessing the acceptability of flaws in metallic structures (Incorporating Corrigendum No. 1)
- Guide to the conservation of historic buildings
- Guide to the design of balconies and terraces
- Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages - complementary guidance to BS EN 806
- Guide to the flushing and disinfection of services supplying water for domestic use within buildings and their curtilages
- Guide to the specification of masonry mortar
- Guide to the structural design of buried pipes (+A1:2025)
- Guidelines for auditing management systems
- Guidelines for health risk assessment and management for non-potable water reuse
- Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
- Gullies for buildings. Access covers
- Gully tops and manhole tops for vehicular and pedestrian areas. Definitions, classification, general principles of design, performance requirements and test methods
- Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of cast iron
- Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of composite materials
- Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel or aluminium alloys
- Gully tops and manhole tops for vehicular and pedestrian areas. Gully tops and manhole tops made of steel reinforced concrete
- Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods. Gypsum boards with mat reinforcement (+A1:2009)
- Gypsum plasterboards - Definitions, requirements and test methods (+A1:2009) (incorporating corrigendum July 2006)
- Health and safety for design and technology in educational and similar establishments - code of practice (+A1:2022)
- Health and safety in tunnelling in the construction industry - code of practice
- Health and well-being and indoor environmental quality in buildings. Health and well-being in non domestic buildings - Code of practice
- Heating and chilled water systems - Double regulating globe valves and flow measurement devices - Specification
- Heating systems and water-based cooling systems in buildings - Design for water-based cooling systems
- Heating systems in buildings - Design for water-based heating systems (+A1:2014)
- Heating systems in buildings - Design of heat pump heating systems