British Standards Institution documents within the Construction Information Service
- Specification for masonry units. Calcium silicate masonry units (+A1:2015)
- Specification for masonry units. Clay masonry units (+A1:2015)
- Specification for masonry units. Manufactured stone masonry units (+A1:2015)
- Specification for masonry units. Natural stone masonry units (+A1:2015)
- Specification for metal channel cable support systems for electrical installations (Incorporating amendment No.1)
- Specification for mortar for masonry. Masonry mortar (Incorporating corrigenda July 2019 and November 2025)
- Specification for mortar for masonry. Rendering and plastering mortar
- Specification for pedestrian restraint systems in metal (AMD Corrigendum 15047) (AMD Corrigendum 16540)
- Specification for performance parameters and test methods for green roof substrates
- Specification for permanently fixed ladders (+A1:2008) (incorporating corrigenda No. 1 and No. 2)
- Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites (+A1:2011)
- Specification for safety and rational use of energy of domestic gas appliances. Radiant/convectors (+A1:2013)
- Specification for salt for spreading on highways for winter maintenance (+A1:2016)
- Specification for selection, installation, inspection, commissioning, servicing and maintenance of gas-fired boilers of rated input not exceeding 70 kW net
- Specification for steel and aluminium access cover systems with over 1 m clear opening
- Specification for steel wire for general fencing purposes
- Specification for structural steel equal and unequal leg angles. Tolerances on shape and dimensions
- Specification for subsoil and requirements for use
- Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above (AMD Corrigendum 15597)
- Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases) (incorporating corrigendum No. 1)
- Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1¼) on premises (+A1:2019)
- Specification for the testing of steel overhead runway beams for hoist blocks
- Specification for timber scaffold boards
- Specification for topsoil
- Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical joints for use solely with surface water pipes and fittings (AMD 8622)
- Specifications for installations inside buildings conveying water for human consumption. Design
- Specifications for installations inside buildings conveying water for human consumption. General (AMD 13472)
- Specifications for installations inside buildings conveying water for human consumption. Installation
- Specifications for installations inside buildings conveying water for human consumption. Operation and maintenance
- Specifications for installations inside buildings conveying water for human consumption. Pipe sizing - Simplified method
- Spectator facilities. General characteristics for spectator viewing area
- Spectator facilities. Separating elements - requirements
- Sprayed concrete. Definitions, specifications and conformity
- Sprayed concrete. Execution
- Stainless steel bars - Reinforcement of concrete - Requirements and test methods
- Stainless steel tubes - dimensions, tolerances and conventional masses per unit length
- Stainless steels. List of stainless steels
- Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
- Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
- Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resistant steels for general purposes
- Stairs, ladders and walkways. Code of practice for the design of helical and spiral stairs (reprinted incorporating amendment No.1 and Corrigenda Nos. 1, 2 and 3)
- Stairs, ladders and walkways. Code of practice for the design of industrial type stairs, permanent ladders and walkways (AMD 14247) (Withdrawn)
- Stairs. Code of practice for the design of stairs with straight stairs and winders
- Standardized method of life cycle costing for construction procurement: a supplement to BS ISO 15686-5 Buildings and constructed assets - Service life planning - Part 5: Life cycle costing
- Stationary lead-acid batteries. Valve regulated types - methods of test (Incorporating corrigendum August 2009)
- Steel fabric for the reinforcement of concrete - Specification
- Steel for the reinforcement and prestressing of concrete - Test methods. Reinforcing bars, rods and wire
- Steel for the reinforcement and prestressing of concrete - Test methods. Welded fabric and lattice girders
- Steel for the reinforcement of concrete - weldable reinforcing steel - bar, coil and decoiled product - specification (+A3:2016)
- Steel for the reinforcement of concrete - Weldable reinforcing steel - General (Incorporating corrigenda December 2021 and March 2025)
- Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification
- Steel products with improved deformation properties perpendicular to the surface of the product - technical delivery conditions
- Steel structures - Execution of structural steelwork. Erection
- Steel structures - Execution of structural steelwork. Fabrication
- Steel structures - Execution of structural steelwork. General requirements and terms and definitions
- Steel structures - Execution of structural steelwork. Steels
- Steel structures - Structural bolting - Test method to determine parameters of bolt tightening procedures
- Steel wire for the reinforcement of concrete products - Specification (AMD 17104)
- Steel, concrete and composite bridges. Code of practice for design of composite bridges (Withdrawn)
- Steel, concrete and composite bridges. Code of practice for design of concrete bridges (Withdrawn)
- Steel, concrete and composite bridges. Code of practice for design of steel bridges (AMD Corrigendum 13200) (AMD 16404) (AMD Corrigendum 16480) (Withdrawn)
- Steel, concrete and composite bridges. Code of practice for fatigue (AMD 9352) (Withdrawn)
- Steel, concrete and composite bridges. General statement (AMD 14179) (Withdrawn)
- Steel, concrete and composite bridges. Recommendations for materials and workmanship, concrete, reinforcement and prestressing tendons (Withdrawn)
- Steel, concrete and composite bridges. Specification for loads (Withdrawn)
- Steel, concrete and composite bridges. Specification for materials and workmanship, concrete, reinforcement and prestressing tendons (Withdrawn)
- Steel-framed windows and glazed doors - specification
- Steels for the reinforcement of concrete - reinforcement couplers - requirements and test methods
- Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
- Structural and supported soils for trees in hard landscapes - Guide
- Structural bearings - Guidance on the use of structural bearings
- Structural bearings. Elastomeric bearings
- Structural bearings. General design rules
- Structural bearings. Guide bearings and restraint bearings
- Structural bearings. Inspection and maintenance
- Structural bearings. Pot bearings
- Structural bearings. Protection
- Structural bearings. Rocker bearings
- Structural bearings. Roller bearings (AMD Corrigendum 17035)
- Structural bearings. Sliding elements
- Structural bearings. Spherical and cylindrical PTFE bearings
- Structural bearings. Transport, storage and installation
- Structural design of buried pipelines under various conditions of loading. General requirements
- Structural design of buried pipelines under various conditions of loading. General requirements (incorporating corrigenda May 2006, July 2008, February 2010 and March 2010) (Withdrawn)
- Structural design of buried pipelines under various conditions of loading. Summary of nationally established methods of design
- Structural design of low-rise buildings. Code of practice for masonry walls for housing (incorporating corrigendum No. 1)
- Structural design of low-rise buildings. Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing
- Structural design of low-rise buildings. Code of practice for timber floors and roofs for housing
- Structural intervention of existing concrete structures using cementitious materials. Jacketing
- Structural steel equal and unequal leg angles. Dimensions (Incorporating corrigendum June 2018)
- Structural steel I and H sections - Tolerances on shape and dimensions
- Structural timber - sizes, permitted deviations (Incorporating corrigendum June 2021)
- Structural timber - strength classes
- Structural timber - Strength classes - Assignment of visual grades and species
- Structural use of aluminium. Code of practice for design (AMD 10485) (Withdrawn)
- Structural use of aluminium. Recommendations for the design of aluminium structures to BS EN 1999 (+A1:2019)
- Structural use of concrete. Code of practice for design and construction (AMD 9882) (AMD 13468) (AMD 16016) (AMD 17307) (Withdrawn)
- Structural use of concrete. Code of practice for special circumstances (AMD 5914) (AMD 12061) (AMD 16017) (Withdrawn)
- Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns (AMD 5918) (Withdrawn)
- Structural use of steel and aluminium. Execution of steel bridges conforming to BS EN 1090-2 - guide