British Standards Institution documents within the Construction Information Service

• Testing fresh concrete. Self-compacting concrete - slump-flow test
• Testing fresh concrete. Self-compacting concrete - V funnel test
• Testing fresh concrete. Slump-test
• Testing fresh concrete. Vebe test
• Testing hardened concrete. Compressive strength - specification for testing machines
• Testing hardened concrete. Compressive strength of test specimens
• Testing hardened concrete. Density of hardened concrete (Incorporating corrigendum November 2020)
• Testing hardened concrete. Depth of penetration of water under pressure
• Testing hardened concrete. Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
• Testing hardened concrete. Determination of the chloride migration coefficient (+A1:2024)
• Testing hardened concrete. Flexural strength of test specimens
• Testing hardened concrete. Making and curing specimens for strength tests
• Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
• Testing of concrete. Making and curing test specimens
• Testing of concrete. Strength of hardened concrete
• Tests for chemical properties of aggregates. Chemical analysis (+A1:2012)
• Tests for chemical properties of aggregates. Determination of water susceptibility of fillers for bituminous mixtures
• Tests for chemical properties of aggregates. Preparation of eluates by leaching of aggregates
• Tests for general properties of aggregates. Common equipment and calibration (Incorporating corrigenda May 2014 and August 2014)
• Tests for general properties of aggregates. Methods for sampling
• Tests for geometrical properties of aggregates. Assessment of fines - Methylene blue test
• Tests for geometrical properties of aggregates. Classification test for the constituents of coarse recycled aggregate (incorporating corrigendum November 2009)
• Tests for geometrical properties of aggregates. Determination of particle shape - Flakiness index
• Tests for geometrical properties of aggregates. Determination of particle size distribution - Sieving method
• Tests for geometrical properties of aggregates. Determination of particle size distribution - test sieves, nominal size of apertures
• Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids
• Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption
• Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler - Pyknometer method
• Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
• Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-Deval)
• Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated oven
• Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
• Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing in the presence of salt (NaCl)
• Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock
• Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
• Textile floor coverings - Classification (+A3:2018)
• Textile floor coverings - Vocabulary
• Textile slings - safety. Lifting slings for general service made from natural and man-made fibre ropes (+A1:2008)
• Textiles - Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
• Thermal bridges in building construction - heat flows and surface temperatures - detailed calculations
• Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
• Thermal energy meters. General requirements
• Thermal insulating materials for pipes, tanks, vessels, ductwork and equipment operating within the temperature range -40 °C to +700 °C - Method for specifying
• Thermal insulation for building equipment and industrial installations. Calculation rules
• Thermal insulation of pipework, ductwork, associated equipment and other industrial installations in the temperature range -100°C to +870°C - Code of practice
• Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification (+A1:2015)
• Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
• Thermal performance of buildings - Air permeability of building components and building elements - Laboratory test method
• Thermal performance of buildings - determination of air permeability of buildings - fan pressurization method
• Thermal performance of buildings - heat transfer via the ground - calculation methods
• Thermal performance of buildings - In situ testing of building test structures. Steady-state data analysis for aggregate heat loss test
• Thermal performance of buildings - transmission and ventilation heat transfer coefficients - calculation method (ISO 13789:2017)
• Thermal performance of curtain walling - calculation of thermal transmittance
• Thermal performance of windows and doors - determination of thermal transmittance by hot box method. Roof windows and other projecting windows
• Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method. Complete windows and doors (ISO 12567-1:2010) (Incorporating corrigendum November 2010)
• Thermal performance of windows, doors and shutters - calculation of thermal transmittance. General (Incorporating corrigendum March 2020)
• Thermal performance of windows, doors and shutters - calculation of thermal transmittance. Numerical method for frames (ISO 10077-2:2017) (+A1:2025)
• Thermal solar systems and components - factory made systems. General requirements
• Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage - specification
• Threaded pipe fittings in malleable cast iron (Incorporating Amendments Nos. 1 and 2)
• Timber for and workmanship in joinery. Specification for wood trim and its fixing (AMD 9386)
• Timber for and workmanship in joinery. Specification for workmanship (AMD 9385)
• Timber in joinery - general requirements
• Timber stairs - structural design - calculation methods
• Timber structures - calculation and verification of characteristic values
• Timber structures - cross laminated timber - requirements
• Timber structures - Dowel-type fasteners - Requirements (Incorporating corrigendum May 2023)
• Timber structures - glued laminated timber and glued solid timber - requirements (incorporating corrigendum June 2014)
• Timber structures - strength graded structural timber with rectangular cross section. General requirements (+A1:2019)
• Timber structures - strength graded structural timber with rectangular cross section. Machine grading; additional requirements for factory production control
• Timber structures - strength graded structural timber with rectangular cross section. Machine grading; additional requirements for type testing (+A1:2022)
• Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties (+A1:2012)
• Timber structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
• Timber windows and doorsets - Fully finished factory-assembled windows and doorsets of various types - Specification
• Timber-based fire door assemblies - code of practice
• Tolerances for building. Recommendations for basic principles for evaluation and specification
• Tree work - Recommendations
• Trees in relation to design, demolition and construction - recommendations
• Trees: from nursery to independence in the landscape – Recommendations
• Trenchless construction and testing of drains and sewers
• Tunnel design - design of concrete segmental tunnel linings - code of practice
• UK National annex for Eurocode - Basis of structural design (incorporating National amendment No. 1)
• UK National Annex to Eurocode 1 - Actions on structures. General actions - Thermal actions
• UK National Annex to Eurocode 1: Actions on structures. Actions induced by cranes and machinery
• UK National annex to Eurocode 1: Actions on structures. General actions - Actions during execution
• UK National Annex to Eurocode 1: Actions on structures. General actions - Actions on structures exposed to fire
• UK National annex to Eurocode 1: Actions on structures. General actions - densities, self-weight, imposed loads for buildings (Incorporating corrigendum July 2019)
• UK National annex to Eurocode 1: Actions on structures. General actions - Snow loads (+A2:2018)
• UK National Annex to Eurocode 1: Actions on structures. General actions - Wind actions (+A1:2010) (incorporating National Amendment No. 1)
• UK National Annex to Eurocode 1: Actions on structures. Silos and tanks
• UK National annex to Eurocode 1: Actions on structures. Traffic loads on bridges (+A1:2020) (Incorporating Corrigendum No. 1)
• UK National Annex to Eurocode 2: Design of concrete structures. Concrete bridges - Design and detailing rules
• UK National Annex to Eurocode 2: Design of concrete structures. Design of fastenings for use in concrete
• UK National annex to Eurocode 2: Design of concrete structures. General rules - Structural fire design
• UK National annex to Eurocode 2: Design of concrete structures. General rules and rules for buildings (+A2:2014)
• UK National Annex to Eurocode 2: design of concrete structures. Liquid retaining and containment structures
• UK National Annex to Eurocode 3 - Design of steel structures. Design of structures with tension components
• UK National annex to Eurocode 3: Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
• UK National Annex to Eurocode 3: Design of steel structures. Crane supporting structures
• UK National Annex to Eurocode 3: Design of steel structures. Design of joints