British Standards Institution documents within the Construction Information Service
- Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts (+A1:2008) (Incorporating corrigendum July 2009)
- Safety rules for the construction and installations of lifts - Particular applications for passenger and good passenger lifts. Accessibility to lifts for persons including persons with disability (incorporating corrigenda No. 1 and No. 2) (Withdrawn)
- Safety signs. Code of practice for escape route signing (Incorporating corrigendum No. 1)
- Sampling and monitoring of water from building services closed systems - Code of practice
- Sampling for Legionella bacteria in water systems - code of practice
- Sanitary installations. Code of practice for space requirements for sanitary appliances (Withdrawn)
- Sanitary installations. Code of practice for the design of sanitary facilities and scales of provision of sanitary and associated appliances (+A1:2009)
- Sanitary installations. Code of practice for the provision of public toilets
- Sanitary installations. Code of practice for the selection, installation and maintenance of sanitary and associated appliances
- Sanitary installations. Code of practice for the selection, installation and maintenance of sanitary and associated appliances (Withdrawn)
- Sanitary installations. Space recommendations - code of practice
- Sanitary tapware - low pressure thermostatic mixing valves - general technical specification
- Schedule of weights of building materials (AMD 105) (AMD 344) (Withdrawn)
- Scheduling, dimensioning, cutting and bending of steel reinforcement for concrete - Specification
- Scheme for the application of European Standards for intrusion and hold-up alarm systems
- Screed material and floor screeds - Screed material - Properties and requirements
- Screeds, bases and in situ floorings. Cementitious terrazzo wearing surfaces - Code of practice (+A1:2011)
- Screeds, bases and in situ floorings. Concrete bases and cementitious levelling screeds to receive floorings - Code of practice (+A1:2009)
- Screeds, bases and in situ floorings. Concrete wearing surfaces - Code of practice (+A2:2011)
- Screeds, bases and in situ floorings. Polymer modified cementitious levelling screeds and wearing screeds - Code of practice (+A2:2011)
- Screeds, bases and in situ floorings. Pumpable self-smoothing screeds - Code of practice
- Screeds, bases and in situ floorings. Synthetic resin floorings - Code of practice (+A1:2010) (incorporating corrigendum No. 1)
- Seamless and welded steel tubes - Dimensions and masses per unit length (AMD Corrigendum 16892)
- Seamless steel tubes for pressure purposes - Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
- Seamless steel tubes for pressure purposes - technical delivery conditions. Stainless steel tubes
- Security and resilience - business continuity management systems - guidance on the use of ISO 22301
- Security and resilience - Business continuity management systems - Requirements (+A1:2024)
- Security and resilience - Crisis management - Guidelines
- Security and resilience - protective security - guidelines for crime prevention through environmental design
- Security and resilience - Security management systems - Requirements (+A1:2024)
- Security and resilience - Vehicle security barriers Application (Incorporating corrigendum January 2024)
- Security and resilience - Vehicle security barriers. Performance requirement, vehicle impact test method and performance rating (Incorporating corrigendum January 2024)
- Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications - Code of practice (Withdrawn)
- Selection and installation of fire-resistant power and control cable systems for life safety, fire-fighting and other critical applications - code of practice
- Selection and installation of manhole tops and gully tops within the highway - guide
- Selection of construction sealants. Guide (+A1:2010)
- Self-supporting double skin metal faced insulating panels - factory made products - specifications
- Separator systems for light liquids (e.g. oil and petrol). Principles of product design, performance and testing, marking and quality control (AMD 15525)
- Separator systems for light liquids (e.g. oil and petrol). Selection of nominal size, installation, operation and maintenance
- Services for fire safety systems and security systems
- Setts of natural stone for external paving - Requirements and test methods
- Sheet roof and wall coverings. Zinc
- Shell boilers. General
- Short-circuit currents in three-phase a.c. systems. Calculation of currents
- Sills, copings and cappings. Specification for copings and cappings of precast concrete, cast stone, clayware, slate and natural stone (+A1:2014)
- Sills, copings and cappings. Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone (+A1:2014)
- Siphonic roof drainage systems - Guide
- Skateparks - safety requirements and test methods
- Slabs of natural stone for external paving - Requirements and test methods
- Slating and tiling for pitched roofs and vertical cladding – code of practice (+A2:2018)
- Slurry surfacing - Requirements (incorporating corrigenda January 2009 and June 2009)
- Small wastewater treatment systems for up to 50 PT. Packaged and/or site assembled domestic wastewater treatment plants
- Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
- Small wastewater treatment systems for up to 50 PT. Prefabricated tertiary treatment units
- Smart cities - supplying data products and services for smart communities - code of practice
- Smart community infrastructures - Operation and maintenance of utility tunnels
- Smoke alarm devices (incorporating corrigendum October 2008)
- Smoke and heat control systems. Natural smoke and heat exhaust ventilators
- Smoke and heat control systems. Power supplies
- Smoke and heat control systems. Pressure differential systems (PDS) - design and calculation methods, installation, acceptance testing, routine testing and maintenance (Incorporating corrigendum October 2022)
- Smoke and heat control systems. Smoke control dampers
- Smoke and heat control systems. Smoke duct sections
- Smoke and heat control systems. Specification for powered smoke and heat control ventilators (fans)
- Smoke and heat control systems. Specification for pressure differential systems - Kits
- Smoke and heat control systems. Specification for pressure differential systems - Kits (AMD Corrigendum 16745) (Withdrawn)
- Smoke and heat control systems. Specification for smoke barriers (AMD 16507) (+A1:2006) (Incorporating corrigendum November 2009)
- Social value - Understanding and enhancing - Guide
- Soil quality - conceptual site models for potentially contaminated sites
- Soil quality - sampling. Framework for the preparation and application of a sampling plan
- Soil quality - sampling. Investigation of potentially contaminated sites
- Soil quality - sampling. Packaging, transport, storage and preservation of samples
- Soil quality - sampling. Preliminary investigations
- Soil quality - sampling. Selection and application of sampling techniques
- Soil quality - sustainable remediation
- Soils for civil engineering purposes. Classification tests (AMD 9027) (Withdrawn)
- Solar heating systems for domestic hot water - Code of practice for design and installation
- Solid wood panelling and cladding - characteristics, requirements and marking (+A2:2020)
- Sound system equipment. Objective rating of speech intelligibility by speech transmission index
- Sound systems for emergency purposes
- Spacers and chairs for steel reinforcement and their specification. Fixing and application of spacers and chairs and tying of reinforcement
- Spacers and chairs for steel reinforcement and their specification. Product performance requirements
- Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
- Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
- Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
- Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure specification (ISO 15612:2018) (Incorporating corrigendum January 2019)
- Specification and qualification of welding procedures for metallic materials - welding procedure test. Arc and gas welding of steels and arc welding of nickel and nickel alloys (+A1:2019) (Incorporating corrigenda July 2017 and May 2018)
- Specification for aggregates from natural sources for concrete (AMD 13579) (Withdrawn)
- Specification for ancillary components for masonry. Bed joint reinforcement of steel meshwork (+A1:2016) (incorporating corrigendum September 2013)
- Specification for ancillary components for masonry. Lintels (+A1:2016) (incorporating corrigendum September 2013)
- Specification for ancillary components for masonry. Wall ties, tension straps, hangers and brackets (+A1:2016) (Incorporating corrigendum September 2013)
- Specification for anodic oxidation coatings on wrought aluminium for external architectural applications (Incorporating amendment No. 1)
- Specification for bitumen-based coatings for cold application, excluding use in contact with potable water (AMD 7287)
- Specification for class 11 arc welding of carbon steel pipework for carrying fluids (AMD 9773)
- Specification for fire hydrant systems equipment. Specification for boxes for foam inlets and dry riser inlets (AMD 5505)
- Specification for fire hydrant systems equipment. Specification for inlet breechings for dry riser inlets (AMD 5504)
- Specification for fire hydrant systems equipment. Specification for landing valves for dry risers (AMD 5776)
- Specification for fire hydrant systems equipment. Specification for landing valves for wet risers (AMD 5912)
- Specification for holding down bolts
- Specification for identification of pipelines and services
- Specification for impact performance requirement for flat safety glass and safety plastics for use in buildings (AMD 4580) (AMD 5189) (AMD 7589) (AMD 8156) (AMD 8693) (Partially superseded but remains current)