British Standards Institution documents within the Construction Information Service

• Playground and recreational areas - Framework for the competence of playground inspectors and playground maintenance technicians
• Playground equipment accessible for all children
• Playground equipment and surfacing. Additional specific safety requirements and test methods for cableways (Incorporating corrigendum January 2019)
• Playground equipment and surfacing. Additional specific safety requirements and test methods for carousels
• Playground equipment and surfacing. Additional specific safety requirements and test methods for fully enclosed play equipment
• Playground equipment and surfacing. Additional specific safety requirements and test methods for rocking equipment (Incorporating corrigendum January 2019)
• Playground equipment and surfacing. Additional specific safety requirements and test methods for slides
• Playground equipment and surfacing. Additional specific safety requirements and test methods for spatial network
• Playground equipment and surfacing. Additional specific safety requirements and test methods for swings (Incorporating corrigendum October 2019)
• Playground equipment and surfacing. General safety requirements and test methods (+A1:2023) (Incorporating corrigenda May 2019)
• Playground equipment and surfacing. Guidance on installation, inspection, maintenance and operation
• Plywood - classification by surface appearance. General
• Plywood - Specifications (+A1:2015)
• Polyethylene pressure pipe with an aluminium barrier layer and associated fittings for potable water supply in contaminated land - size 20 mm to 630 mm
• Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods (Incorporating corrigendum January 2016)
• Post-event flood assessments - guidance on investigating flooding incidents
• Power installations exceeding 1 kV AC and 1,5 kV DC. AC (+A11:2025)
• Power installations exceeding 1 kV AC and 1,5 kV DC. DC
• Power operated pedestrian doorsets - Safety in use - Requirements and test methods (+A1:2024) (Incorporating corrigendum January 2024)
• Power operated pedestrian doorsets - Safety in use. Code of practice for risk assessment and risk reduction
• Power operated pedestrian entrance control equipment - Safety in use - Requirements and test methods
• Power transformers. Ability to withstand short-circuit
• Power transformers. Application guide
• Power transformers. Dry-type transformers (IEC 60076-11:2018)
• Power transformers. General (incorporating corrigendum June 2012)
• Power transformers. Loading guide for mineral-oil-immersed power transformers
• Power transformers. Specification of voltage regulating distribution transformers (VRDT)
• Power transformers. Temperature rise for liquid-immersed transformers
• Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility - specification
• Precast concrete masonry units. Guide for specifying precast concrete masonry units
• Precast concrete products - Box culverts (+A2:2011)
• Precast concrete products - Bridge elements (+A1:2012)
• Precast concrete products - concrete finishes - identification
• Precast concrete products - Foundation piles (incorporating amendment no. 1)
• Precast concrete products - Hollow core slabs (+A3:2011)
• Precast concrete products - retaining wall elements
• Precast concrete products - Stairs
• Precast concrete products. Beam-and-block floor systems. Beams
• Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
• Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods
• Prefabricated reinforced components of autoclaved aerated concrete (Incorporating corrigendum November 2016)
• Prefabricated wiring systems intended for permanent connection in fixed installations - Specification (+A1:2010) (incorporating corrigendum No. 1)
• Preparation of documents used in electrotechnology. Rules
• Preparation of steel substrates before application of paints and related products - surface preparation methods. General principles
• Preparation of steel substrates before application of paints and related products - surface preparation methods. Hand- and power-tool cleaning
• Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
• Preparation of steel substrates before application of paints and related products - surface roughness characteristics of blast-cleaned steel substrates. Replica tape method for the determination of the surface profile (ISO 8503-5:2017)
• Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates. Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
• Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness. Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:2017)
• Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness. Initial surface conditions, preparation grades and flash rust grades in connection with water jetting
• Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness. Preparation grades of welds, edges and other areas with surface imperfections
• Preservation of wood - Code of practice
• Principles for successful collaborative business relationship management
• Process for designing and implementing Biodiversity Net Gain - specification
• Product specifications. Guide to preparation (Incorporating amendment No.1 to BS 7373:1998) (Renumbers BS 7373:1998 as BS 7373-1:2001)
• Products and systems for the protection and repair of concrete structures - definitions, requirements, quality control and AVCP. Quality control and assessment and verification of the constancy of performance (AVCP)
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Anchoring of reinforcing steel bar
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Concrete injection
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Definitions
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. General principles for use of products and systems
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Reinforcement corrosion protection
• Products and systems for the protection and repair of concrete structures - definitions, requirements, quality control and evaluation of conformity. Site application of products and systems and quality control of the works
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Structural and non-structural repair
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Structural bonding
• Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity. Surface protection systems for concrete
• Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond-strength by pull-off
• Project management - principles and guidance for the management of projects (+C1:2019) (Incorporating Corrigendum No. 1)
• Project, programme and portfolio management - Context and concepts
• Project, programme and portfolio management - Guidance on governance
• Project, programme and portfolio management - guidance on project management
• Protection against electric shock - common aspects for installation and equipment
• Protection against lightning. Electrical and electronic systems within structures
• Protection against lightning. Electrical and electronic systems within structures (IEC 62305-4:2010) (Incorporating corrigendum November 2016) (Superseded but remains current)
• Protection against lightning. General principles
• Protection against lightning. General principles (IEC 62305-1:2010) (Incorporating corrigendum November 2016) (Superseded but remains current)
• Protection against lightning. Physical damage to structures and life hazard
• Protection against lightning. Physical damage to structures and life hazard (Superseded but remains current)
• Protection against lightning. Risk management (Incorporating corrigendum March 2025)
• Protection against lightning. Risk management (Superseded but remains current)
• Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow (Incorporating corrigendum July 2009)
• Protection of below ground structures against water ingress - code of practice
• Protection of buildings against water from the ground (AMD 1511) (AMD 2196) (AMD 2470) (Partially superseded but remains current)
• Protection of metallic materials against corrosion - guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for copper and copper alloys
• Qualification testing of welders - Fusion welding. Steels
• Quality management - guidance for people engagement
• Quality management - guidance to understand, evaluate and improve organizational quality culture
• Quality management - Guidelines for competence management and people development
• Quality management - Guidelines for configuration management
• Quality management - guidelines for quality plans
• Quality management - quality of an organization - guidance to achieve sustained success (ISO 9004:2018)
• Quality management and quality assurance standards. Guidelines for selection and use
• Quality management systems - fundamentals and vocabulary
• Quality management systems - Guidance for documented information
• Quality management systems - guidelines for the application of ISO 9001:2015 (Incorporating corrigendum November 2016)
• Quality management systems - Organizational change management - Processes
• Quality management systems - Specific requirements for the application of ISO 9001:2015 by organizations in the supply chain of the nuclear energy sector supplying products and services important to nuclear safety (ITNS) (+A1:2024) (Incorporating corrigenda August 2022 and September 2024)
• Quality management systems - Specification for the application of BS EN ISO 9001:2015 in the built environment sector (Incorporating Corrigendum No. 1)
• Quality management systems. Requirements (+A1:2024)
• Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
• Quality requirements for fusion welding of metallic materials. Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4