British Standards Institution documents within the Construction Information Service
- Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
- Modern methods of construction for new-build residential properties - Specification
- Mortar - Methods of test for mortar and screed - Chemical analysis and physical testing (+A2:2013) (incorporating corrigenda Nos. 1 and 2)
- National annex (informative) to Eurocode 3 - Design of steel structures. Material toughness and through thickness properties
- National annex to Eurocode 1: actions on structures. Accidental actions (+A1:2014) (incorporating corrigenda August 2014 and November 2015)
- Natural stone test methods - determination of flexural strength under concentrated load
- Natural stone test methods - determination of geometric characteristics on units
- Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions (incorporating corrigendum No. 1 and amendment No. 1)
- Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (AMD 17127) (AMD Corrigendum 17157)
- Non-automatic fire-fighting systems in buildings - Code of practice
- Non-destructive testing of welds - general rules for metallic materials
- Non-destructive testing of welds - Ultrasonic testing - Acceptance levels
- Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment
- Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO 22825:2017)
- Non-destructive testing of welds - visual testing of fusion-welded joints (ISO 17637:2003)
- Non-preloaded structural bolting assemblies. Fitness for purpose
- Non-preloaded structural bolting assemblies. General requirements
- Nursery stock. Specification for trees and shrubs
- Occupational health and safety management - risks arising from climate change and climate change action - guidance for organizations
- Occupational health and safety management systems - general guidelines for the application of ISO 45001. Guidance on incident investigation
- Occupational health and safety management systems - general guidelines for the application of ISO 45001. Guidance on managing occupational health
- Occupational health and safety management systems - general guidelines for the application of ISO 45001. Risks and opportunities
- Occupational health and safety management systems - Requirements with guidance for use (+A1:2024) (Incorporating corrigendum August 2023)
- Occupational health and safety management systems. A practical guide for SMEs (Handbook)
- Office furniture - Work tables and desks. Dimensions
- Office furniture - work tables. Safety, strength and durability requirements (+A1:2019)
- Oil burning equipment. Carbon steel oil storage tanks - specification
- On-site non-potable water systems. Systems for the use of rainwater (Incorporating corrigendum July 2024)
- On-site non-potable water systems. Systems for the use of treated greywater
- Open fronted gas-fired independent space heaters
- Operating forces - Test method. Doors
- Operation of electrical installations. General requirements
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Framework for specification of BIM implementation
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - information management using building information modelling. Concepts and principles
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - information management using building information modelling. Delivery phase of the assets (Incorporating corrigendum February 2021) (+ Revised NA)
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling. Health and safety information
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - information management using building information modelling. Information exchange (Incorporating corrigendum August 2023)
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - information management using building information modelling. Operational phase of the assets
- Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - information management using building information modelling. Security-minded approach to information management
- Overhead electrical lines exceeding AC 1 kV. General requirements - Common specifications
- Overhead electrical lines exceeding AC 1 kV. National normative aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) (+A1:2018)
- Painting of buildings - code of practice
- Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete. Classification
- Paints and varnishes - Corrosion protection of steel structures by protective paint systems. Classification of environments
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Design considerations
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Development of specifications for new work and maintenance
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Execution and supervision of paintwork (ISO 12944-7:2017)
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. General introduction
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Laboratory performance test methods (ISO 12944-6:2018)
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Protective paint systems
- Paints and varnishes - corrosion protection of steel structures by protective paint systems. Types of surface and surface preparation
- Paints and varnishes - determination of film thickness (ISO 2808:2019)
- Paints and varnishes - Determination of resistance to filiform corrosion. Aluminium substrates (ISO 4623-2:2016)
- Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering
- Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by velvet method
- Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking
- Paints and varnishes - evaluation of degradation of coatings - designation of quantity and size of defects, and of intensity of uniform changes in appearance. General introduction and designation system
- Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by tape method
- Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting
- Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes inappearance. Assessment of degree of flaking
- Paints and varnishes - reactive coatings for fire protection of metallic substrates - definitions, requirements, characteristics and marking (Incorporating corrigendum March 2016)
- Partitions (including matching linings). Code of practice for design and installation
- Partitions (including matching linings). Specification for performance requirements for strength and robustness including methods of test
- Passive safety of support structures for road equipment - Requirements and test methods (+A1:2024) (Incorporating corrigendum September 2023)
- Patent glazing and sloping glazing for buildings. Code of practice for design and installation of sloping and vertical patent glazing
- Pavements constructed with clay, concrete or natural stone paving units. Code of practice for the structural design of pavements using modular paving units (Incorporating corrigendum No. 1)
- Pavements constructed with clay, concrete or natural stone paving units. Design and installation of modular permeable pavements - Guide
- Pavements constructed with clay, concrete or natural stone paving units. Installation of pavements using modular paving units - Code of practice
- Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying natural stone, precast concrete and clay kerb units (Superseded but remains current)
- Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving (Superseded but remains current)
- Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of lightly trafficked pavements constructed of clay pavers or precast concrete paving blocks (AMD Corrigendum 13217) (Withdrawn)
- Pedestrian doorsets, industrial, commercial, garage doors and openable windows - product standard, performance characteristics - fire resisting and/or smoke control characteristics (Incorporating corrigenda October 2014 and April 2018)
- Pedestrian doorsets, windows, curtain walling, grilles and shutters - burglar resistance - requirements and classification
- Performance of windows and doors. Classification for additional performance characteristics and guidance on selection and specification (+A1:2013)
- Performance of windows and doors. Classification for operation and strength characteristics and guidance on selection and specification
- Performance of windows and doors. Classification for weathertightness and guidance on selection and specification (+A1:2016)
- Permanent counterweighted guardrail systems - specification
- Personal equipment for protection against falls - Rope access systems. Fundamental principles for a system of work
- Personal fall protection equipment - anchor devices
- Personal fall protection equipment - anchor systems - specification
- Personal fall protection equipment – anchor systems - system design, installation and inspection - code of practice
- Personal fall protection equipment - Guided type fall arresters including an anchor line. Guided type fall arresters including a rigid anchor line (+A1:2017)
- Personal protective equipment - safety footwear (+A1:2024)
- Personal protective equipment against falls from a height - Energy absorbers
- Personal protective equipment against falls from a height - Test methods
- Photovoltaic (PV) arrays. Design requirements
- Photovoltaic (PV) systems - requirements for testing, documentation and maintenance. Grid connected systems - documentation, commissioning tests and inspection (+A1:2018)
- Photovoltaic (PV) systems - requirements for testing, documentation and maintenance. Grid connected systems - maintenance of PV systems
- Pillar fire hydrants
- Pipeline systems. Steel pipelines on land - code of practice (+A1:2016)
- Pipeline systems. Steel pipelines on land - Guide to the application of pipeline risk assessment to proposed developments in the vicinity of major accident hazard pipelines containing flammables - Supplement to PD 8010-1:2004 (+A1:2013)
- Pipelines. Design and construction of steel pipelines in land (AMD 16832)
- Planning, design, installation and use of permanently installed access equipment - Code of practice. Suspended access equipment
- Plastic piping systems - Structural design of buried thermoplastics piping systems - Procedure and guidance under various conditions of loading (Incorporating corrigendum November 2025)
- Plastic piping systems for water supply, and for drains and sewers under pressure - polyethylene (PE). Fittings (Incorporating corrigendum December 2024)
- Plastics piping systems for non-pressure underground drainage and sewerage - polyethylene (PE). Specifications for pipes, fittings and the system (+A1:2011)
- Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP). Specifications for pipes, fittings and the system (+A1:2022)
- Plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for ancillary fittings including shallow inspection chambers
- Plastics piping systems for non-pressure underground drainage and sewerage - unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Specifications for manholes and inspection chambers
- Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-u). Specifications for pipes, fittings and the system (+A1:2023) (Incorporating corrigenda April and May 2023)