BRE documents within the Construction Information Service

• Management of construction and demolition wastes
• Managing and exploiting your knowledge assets: knowledge based decision support techniques for the construction industry
• Managing fire risk in commercial buildings: a guide for facilities managers
• Managing risks in existing buildings. An overview of UK risk-based legislation for commercial and industrial premises
• Manufacture of synthetic aggregates from colliery spoil
• Marine aggregates in concrete
• Masonry and concrete structures: measuring in-situ stress and elasticity using flat jacks
• Masonry chimneys: dpcs and flashings - installation
• Masonry chimneys: dpcs and flashings - location
• Masonry walls: chasing
• Masterplanning science and technology parks. A BRE Guide
• Mastic asphalt for flat roofs: testing for quality assurance
• Material resource efficiency in construction. Supporting a circular economy
• Measuring daylight
• Measuring fuel poverty
• Measuring the compressive strength of masonry materials: the screw pull out test
• Measuring the wellbeing benefits of interior materials: Research programme WISER (Wellbeing: Improving Satisfaction of End users in Refurbishment)
• Measuring up: a practical guide to benchmarking in construction
• Mechanical installation of roof-mounted photovoltaic systems
• Meeting building designers' needs for trade information
• Metal cladding: assessing the thermal performance of built up systems which use Z spacers
• Method for evaluation of repairs to reinforced concrete in marine conditions
• Method for predicting changes in building costs
• Method of assessing the soundness of some dense floor screeds
• Method of determining the state of desiccation in clay soils
• Micro-wind turbines in urban environments: an assessment
• Micro-wind turbines on house roofs
• Micro-wind turbines on tall buildings
• Minimising noise from domestic fan systems and fan-assisted radon mitigation systems
• Minimising refrigerant emissions from air conditioning systems in buildings
• Minimising the risk of alkali silica reaction: alternative methods
• Modelling and controlling interstitial condensation in buildings
• Modelling condensation and airflow in pitched roofs
• Modelling degradation processes affecting concrete
• Modelling of building services - 33 Old Broad Street
• Modelling the performance of thermal mass
• Modern methods of construction (MMC) in housing: designing for manufacture
• Modern methods of construction (MMC) in housing: drivers and barriers to their use
• Modern methods of construction (MMC) in housing: planning for manufactured housing
• Modern methods of construction (MMC) in housing: successful development and manufacture of MMC products
• Modern methods of house construction: a surveyors guide
• Modified wood. An introduction to products in UK construction
• Moisture conditions in the walls of timber frame houses - the effects of holes in vapour barriers
• Moisture conditions in the walls of timber-framed housing
• Moisture content of timber in use
• Moisture relations in timber-framed walls
• Moisture resistance of laminated veneer lumber (LVL)
• Monitoring building and ground movement by precise levelling
• Mortars for blockwork: improved thermal performance
• Mould and its control
• Mound filter systems for the treatment of domestic wastewater
• Move to low-carbon design: are designers taking the needs of building users into account?
• Movement of foam plastics in warm deck flat roofs
• Mowlem in-situ concrete low-rise dwellings
• Multi-storey timber framed buildings: a design guide
• National planning guidance - biodiversity
• Natural fibre insulation: An introduction to low-impact building materials
• Natural fibre reinforced polymers (NFRPs) in the construction industry
• Natural ventilation in atria for environmental and smoke control: an introductory guide
• Natural ventilation in non-domestic buildings
• Naturally innovative. Using biomimetics in construction
• New build and refurbishment in the Sustainable communities plan
• New fire design method for steel frames with composite floor slabs
• New materials in hot climates
• New Methodology for Generating BREEAM Category Weightings
• New requirements for fire detection and alarm network systems
• New ways of predicting discomfort glare
• Night ventilation for cooling office buildings
• Ninety years of housing, 1921-2011: Trends relating to living standards, energy use and carbon emissions
• Nissen-Petren steel framed houses
• No fines houses: construction details for the guidance of owners, lenders, surveyors and engineers evaluating cast insitu systems
• Noise climate around our homes
• Noise from neighbours and the sound insulation of party walls in houses
• Non-domestic building energy fact file
• Non-ferrous metal wastes as aggregates in highway construction
• Non-Portland cement grc
• Non-traditional houses: Identifying non-traditional houses in the UK 1918-75. Part 1 - Metal framed houses
• Non-traditional houses: Identifying non-traditional houses in the UK 1918-75. Part 2 - Precast concrete houses
• Non-traditional houses: Identifying non-traditional houses in the UK 1918-75. Part 3 - In-situ concrete houses
• Non-traditional houses: Identifying non-traditional houses in the UK 1918-75. Part 4 - Timber framed houses
• Non-uniform lighting: the prediction of illuminance distributions
• Obsolete housing: a study of long-term vacant dwellings in the private sector
• Obtrusive light from proposed developments
• Office lighting
• Off-site construction: an introduction
• Open System Building steel-framed houses
• Operating BEMS: A practical approach to building energy management systems
• Optimising ground investigation
• Optimum start controls in modern low-energy buildings
• Outline guide to assessment of traditional housing for rehabilitation
• Overcladding: external walls of large panel system dwellings
• Overroofing: especially for large panel system dwellings
• Oversites - concreting when weather may be bad
• Painting exterior wood
• Part L explained - the BRE guide
• Passive and reactive fire protection to structural steel
• Passive gas tracer method for monitoring ventilation rates in buildings
• Passive stack ventilation in dwellings
• Passive stack ventilation systems: design and installation
• People and lighting controls