BRE documents within the Construction Information Service

• External walls: joints with windows and doors - application of sealants
• External walls: joints with windows and doors - detailing of sealants
• External walls: reducing the risk from interstitial condensation
• External walls: rendering - application
• External walls: rendering - resisting rain penetration
• F.A.S.T. approach: function analysis and diagramming techniques
• Factors affecting service life predictions of buildings: a discussion paper
• Factors determining life hazard from fires in group-residential buildings. Part 1: Hotels and boarding houses
• Factors determining life hazard from fires in group-residential buildings. Part 2: Health care, residential care premises and halls of residence
• Factory applied priming paints for exterior joinery
• Factory applied stain basecoats for exterior joinery
• Factory glazed windows: introduction and the glazing process
• Factory glazed windows: transport, storage and installation
• Falkiner-Nuttall steel-framed houses
• Falls from domestic balconies
• Falls from domestic windows
• False alarms from automatic fire detection systems
• Felted cold deck flat roofs: remedying condensation by converting to warm deck
• Fibre building board: types and uses
• Fibre reinforced lightweight inorganic materials
• Fibre reinforced plastics for concrete reinforcement: position document
• Fibre reinforced polymer materials in construction
• Fibre reinforced polymers in construction: durability
• Fibre reinforced polymers in construction: long-term performance in service
• Fibre reinforced polymers in construction: predicting weathering
• Fidler houses
• Field measurements of the effect of plastered lightweight masonry inner leaves on the sound insulation of plastered brick and dense blockwork party walls
• Field measurements of the sound insulation of dry-lined masonry party walls
• Field measurements of the sound insulation of floors with floating screeds and hollow precast bases
• Field measurements of the sound insulation of plastered cavity masonry walls
• Field measurements of the sound insulation of plastered solid blockwork walls
• Field measurements of the sound insulation of timber-joist party floors
• Financial benefits of energy efficiency to housing landlords
• Findings from the Penwithick Green Deal pilot scheme in Cornwall
• Fire and disabled people in buildings
• Fire and explosion hazards associated with the redevelopment of contaminated land
• Fire behaviour of breather membranes
• Fire doors
• Fire engineering in tunnels
• Fire engineering: a collection of BRE expert guidance on fire modelling and engineering for the built environment
• Fire grading of buildings: Part I. General principles and structural precautions
• Fire grading of buildings: Part II. Fire fighting equipment, Part III. Personal safety and Part IV. Chimneys and flues
• Fire modelling with computational fluid dynamics
• Fire modelling. 2004 edition
• Fire performance of external thermal insulation for walls of multistorey buildings. 3rd edition
• Fire performance of light steel framed buildings
• Fire performance of loft insulating materials
• Fire performance of structural insulated panel systems
• Fire risk from combustible cavity insulation
• Fire risk in high-rise and super high-rise buildings: Prevention and mitigation
• Fire safety and security in places of worship
• Fire safety and security in retail premises
• Fire safety considerations in the design of structural sandwich panels
• Fire safety engineering: a reference guide
• Fire safety in buildings
• Fire safety in buildings - a collection of BRE expert guidance on fire risk, protection and detection
• Fire safety of concrete structures: background to BS 8110 - fire design
• Fire safety of PTFE-based materials used in buildings
• Fire spread between caravans
• Fire spread in buildings
• Fires in dwellings - an investigation of actual fires in BISF houses
• Five storey timber frame hall of residence: a reconstruction case study
• Fixed gas extinguishing systems for fire protection
• Flat dilatometer testing
• Flat or low pitched roofs: laying flexible membranes when weather may be bad
• Flat roof design: bituminous waterproof membranes
• Flat roof design: the technical options
• Flat roof design: thermal insulation
• Flat roofs: assessing bitumen felt and mastic asphalt roofs for repair
• Flat roofs: built-up bitumen felt - remedying rain penetration
• Flat roofs: built-up bitumen felt - remedying rain penetration at abutments and upstands
• Flat roofs: making repairs to bitumen felt and mastic asphalt roofs
• Flexible electrical networks for a low carbon future. Network and built environment opportunities for enabling smarter networks
• Flexibly jointed clay-ware drainage pipes: jointing and backfilling
• Flood resilient building: Part 1 - Legislation, planning, flood risk assessment and performance of buildings
• Flood resilient building: Part 2 - Building in flood-risk areas and designing flood-resilient buildings
• Floor loading in warehouses: a review
• Flooring, paving and setts: requirements for safety in use
• Floors: cement-based screeds - mixing and laying
• Floors: cement-based screeds - specification
• Flow resistance and wind performance of some common ventilation terminals
• Formaldehyde vapour from urea-formaldehyde foam insulation
• Formwork for modern, efficient concrete construction
• Forrester-Marsh houses
• Foundation movement and remedial underpinning in low-rise buildings
• Foundations for low rise building extensions
• Foundations on shrinkable clay: avoiding damage due to trees
• Foundations: Proceedings of the Second British Geotechnical Association International Conference on Foundations (ICOF 2008). Volume 1
• Foundations: Proceedings of the Second British Geotechnical Association International Conference on Foundations (ICOF 2008). Volume 2
• Free cooling with displacement ventilation
• Freestanding brick walls: repairs to copings and cappings
• Freestanding masonry boundary walls: materials and construction
• Freestanding masonry boundary walls: stability and movement
• Full cost of poor housing
• Funding renewable energy projects: an introduction to the Feed-In Tariff and Renewable Heat Incentive schemes and associated funding options
• Future energy use and carbon dioxide emissions for UK housing: a scenario
• Gale damage to buildings in the UK - an illustrated review
• Gas engine driven heat pump dehumidification system at the Farnborough Recreation Centre
• Geophysical testing
• Geotechnics for building professionals