BRE documents within the Construction Information Service
- Residential sprinklers for fire protection. Part 1 - introduction (revised 2012)
- Residential sprinklers for fire protection. Part 2 - installation (revised 2012, amended 2014)
- Resistance of masonry paints to microbial attack
- Resource efficiency, site operation and handover - a collection of BRE expert guidance on construction site operation and management
- Response of structures to dynamic loads (2004 edition)
- Responsible sourcing of construction products. Framework standard for the responsible sourcing of construction products (BES 6001)
- Responsible sourcing of materials in construction
- Retail warehouses: the potential for increasing energy efficiency
- Retractable grandstands: dynamic response
- Retrofitting solar shading
- Retro-installation of bed joint reinforcement in masonry
- Reuse of foundations for urban sites. A best practice handbook
- Reuse of foundations for urban sites. Proceedings of the international council
- Review of routine foundation design practice
- Review of service life design of concrete structures
- Review of the effect of fly ash and slag on alkali-aggregate reaction in concrete
- Riley steel-framed houses
- Rising damp in walls. Diagnosis and treatment
- Risk assessment procedure for health and safety in buildings
- Risks of dust fires and explosions. A review of European test methods
- Roften steel framed houses
- Role for concrete in global development. Proceedings of the international conference held at the University of Dundee, Scotland, UK on 8-9 July 2008
- Role of windows in domestic burglary
- Roof loads due to local drifting of snow
- Roofs and roofing. Performance, diagnosis, maintenance, repair and the avoidance of defects. 3rd edition
- Roofs as barriers to fire
- Roofs: eaves gutters and downpipes - installation
- Roofs: eaves gutters and downpipes - specification
- Safe and secure town centres at night toolkit
- Safe and secure town centres at night. An introduction to the BRE toolkit
- Safe as houses?
- Safer floors. Guidance on specifying flooring for internal and external safety in domestic buildings
- Safety and environmental requirements of new refrigerants
- Safety aspects of handrail design: a review
- Safety considerations in designing roofs
- Sanitary pipework. Part 1: design basis
- Sanitary pipework. Part 2: design of pipework
- SAP for beginners. An introductory guide for building professionals
- Schedules for the preservation of hem-fir timber
- Schools Design Forum workshop - 13 September 2006. A summary of the outputs from the workshop
- Scope for reducing carbon emissions from housing
- Sealing cracks in solid floors: a BRE guide to radon remedial measures in existing dwellings
- Security glazing: is it all that it's cracked up to be? A guide to the selection of effective security glazing
- Selecting building sealants with ISO 11600
- Selecting electronic security systems: An introduction
- Selecting gaskets for construction joints
- Selecting lighting controls (2014 revision)
- Selecting natural building stones
- Selecting windows by performance
- Selection and performance of sealants
- Selection of building management systems
- Selection of doors and doorsets by performance
- Selection of sprinklers for high rack storage in warehouses
- Selection of timber for exterior joinery from the genus Shorea
- Selection of window hardware by performance
- Self-compacting concrete
- Self-heating and spontaneous combustion. Isothermal test methods
- Self-sealing waste valves for domestic use: an assessment
- Service life prediction of timber cladding: developments in standards and specifications
- Serviceability design of ply-web roof beams
- Shrinkage of natural aggregates in concrete
- Silica fume in concrete
- Simple foundations for low-rise housing: groundworks - getting it right
- Simple foundations for low-rise housing: rule of thumb design
- Simple foundations for low-rise housing: site investigation
- Simple measuring and monitoring of movement in low-rise buildings: part 1: cracks
- Simple measuring and monitoring of movement in low-rise buildings: part 2: settlement, heave and out-of-plumb
- Simplified approach to smoke-ventilation calculations
- Simplified roof snow load map for Scotland
- Site investigation for low rise building: desk studies (1990 reprint)
- Site investigation for low-rise building: direct investigations
- Site investigation for low-rise building: procurement
- Site investigation for low-rise building: soil description
- Site investigation for low-rise building: the walk-over survey
- Site investigation for low-rise building: trial pits
- Site layout planning for daylight
- Site layout planning for daylight and sunlight: a guide to good practice. 3rd edition
- Site layout planning for sunlight and solar gain
- Site-applied adhesives - failures and how to avoid them
- Site-cut pitched timber roofs: construction
- Site-cut pitched timber roofs: design
- Siting micro-wind turbines on house roofs
- Slate and tile roofs: avoiding damage from aircraft wake vortices
- Slate clad roofs: fixing of slates and battens
- Slated and tiled pitched roofs: flashings and cavity trays for step and stagger layouts - specification
- Slated or tiled pitched roofs - conversion to accommodate rooms: installing quilted insulation at rafter level
- Slated or tiled pitched roofs - conversion to accommodate rooms: ventilation of voids to the outside air
- Slated or tiled pitched roofs: restricting the entry of water vapour from the house
- Slated or tiled pitched roofs: ventilation to outside air
- Sloping glazing: understanding the risks
- Slurry trench cut-off walls to contain contamination
- Small scale, building integrated, wind power systems
- Smart growth: a sustainable strategy for urban development and regeneration
- Smart home systems and the Code for sustainable homes
- Smart meters and smart energy networks for dwellings
- SmartLIFE - lessons learned
- Smith system houses in Sandwell, West Midlands
- Smoke detection in high ceiling spaces - Part 1: Introduction, literature review and modelling
- Smoke detection in high ceiling spaces - Part 2: Fire tests and conclusions
- Smoke shafts protecting fire fighting shafts: their performance and design