Loss Prevention Certification Board documents within the Construction Information Service

• Control and indicating equipment for intruder and hold-up alarms. Issue 1.1 dated 20/09/05
• Fire detection and alarm systems for buildings: Alternative specification for control and indicating equipment for use in countries not bound by CEN/CENELEC internal regulations. Issue 1.2 dated Jan 2014
• Fire test and evaluation requirements for the LPCB approval and listing of temporary buildings for use on construction sites. Issue 4.1 dated Jan 2014
• Fire test and performance requirements for innovative methods of building construction. Issue 1.1 dated Jan 2014
• LPCB Fire resistance requirements for elements of construction used to provide compartmentation. Issue 2.2 dated Jan 2014
• Plastic pipe and fittings for use in automatic sprinkler systems. Issue 3.1 dated Jan 2014
• Quality schedule for the certification of automatic fire sprinklers. Issue 2.2 dated Jan 2014
• Red book volume 1: List of approved products and services
• Red book volume 2: List of approved products and services
• Requirements and test methods for automatic sprinkler glass bulbs with a narrow operating temperature band. Issue 1.2 dated Jan 2014
• Requirements and test methods for pipe hangers. Issue 1.2 dated Jan 2014
• Requirements and test methods for the approval of watermist systems for use in commercial low hazard occupancies. Issue 1.1
• Requirements and test methods for the LPCB approval and listing of personal protection watermist systems. Issue 1.0 dated June 2015
• Requirements and test methods for the LPCB approval of condensed aerosol extinguishing generators. Issue 1.0 dated June 2021
• Requirements and test procedures for the LPCB approval of direct low pressure (DLP) application fixed fire suppression systems. Issue 1.0 dated January 2017
• Requirements and testing methods for automatic sprinklers. Issue 5.2
• Requirements and testing methods for check valves. Issue 3.1
• Requirements and testing methods for pumps for automatic sprinkler installation pump sets. Issue 2.0
• Requirements and testing methods for remote monitored gear operated butterfly stop valves. Issue 3.2
• Requirements and testing procedures for combined domestic smoke and carbon monoxide detectors. Issue 1.1
• Requirements and testing procedures for radio linked fire detection and fire alarm equipment. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of building components, strongpoints, security enclosures and free-standing barriers offering resistance to intruders attempting to use stealth to gain entry. Issue 1.0 dated May 2015
• Requirements and testing procedures for the LPCB approval and listing of carbon monoxide fire detectors using electrochemical cells. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of component compatibility for fire detection and alarm systems. Issue 2.3
• Requirements and testing procedures for the LPCB approval and listing of cylinders for locks. Issue 2.1
• Requirements and testing procedures for the LPCB approval and listing of diesel engines for sprinkler pump sets. Issue 1.2
• Requirements and testing procedures for the LPCB approval and listing of direct reading flow meters. Issue 1.3
• Requirements and testing procedures for the LPCB approval and listing of dry pipe valve sets. Issue 1.3
• Requirements and testing procedures for the LPCB approval and listing of fire detection and fire alarm network systems. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of intruder resistant security glazing units. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of padlocks. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of pipe couplings. Issue 3.1
• Requirements and testing procedures for the LPCB approval and listing of safe storage units. Part 1: Safes and strongrooms. Issue 4.3
• Requirements and testing procedures for the LPCB approval and listing of 'theft resistant' electronic products. Issue 1.1
• Requirements and testing procedures for the LPCB approval and listing of wet alarm valve sets. Issue 2.3
• Requirements and testing procedures for the LPCB certification and listing of fixed fire extinguishing systems for catering equipment. Issue 2.3
• Requirements and testing procedures for the LPCB certification and listing of intruder resistant building components, strongpoints, security enclosures and free-standing barriers. Issue 8.1
• Requirements and tests for exposed surfaces having reaction to fire classifications of class 0 and class 1. Issue 1.2
• Requirements and tests for fire resistant glazing systems. Issue 2.2
• Requirements and tests for LPCB approval of fixed fabric smoke curtains, fixed metal smoke curtains and powered smoke curtains. Issue 2.2
• Requirements and tests for LPCB approval of non-loadbearing external cladding systems applied to the masonry face of a building. Issue 2.1
• Requirements and tests for LPCB approval of non-loadbearing external cladding systems fixed to and supported by a structural steel frame. Issue 1.1
• Requirements and tests for LPCB approval of wall and floor penetration and linear gap seals. Issue 4.2
• Requirements and tests for the LPCB approval and listing of fire dampers. Issue 4.1
• Requirements and tests for the LPCB approval and listing of roofing systems - protection against fire from outside the building. Issue 1.1
• Requirements for alarm receiving centres. Issue 2.3 dated 27/04/15
• Requirements for certificated fire detection and alarm systems firm. Issue 5.5 dated August 2023
• Requirements for companies providing secure asset registration services. Issue 3.1
• Requirements for contractors engaged in the design, installation, commissioning and servicing of automatic sprinkler systems. Issue 1.1
• Requirements for fire testing of fixed gaseous fire extinguishing systems. Issue 1.2
• Requirements for firms engaged in the design installation, commissioning and servicing of gas extinguishing and condensed aerosol systems
• Requirements for LPCB approval and listing of intruder alarm control and indicating equipment. Issue 1 dated 27/09/2005
• Requirements for LPCB approval and listing of intruder alarm movement detectors. Issue 1 dated 27/09/2005
• Requirements for LPCB approved fire sprinkler pump sets used in automatic sprinkler installations. Issue 1.2
• Requirements for LPCB certification and Redbook listing of supervised premises transceivers: intrusion and hold-up alarm systems. Issue 4.1 dated Jan 2016
• Requirements for testing flexible hoses for sprinkler systems. Issue 1.2
• Requirements for the approval of sprinkler installers in the UK and Ireland for residential and domestic sprinkler systems. Issue 1.1
• Requirements for the approval of sprinkler system contractors in the UK and Ireland. Issue 5.0
• Requirements for the certification of firms installing or applying passive fire protection products. Issue 1.1 dated 20/09/05
• Requirements for the LPCB approval and listing for fire performance of containment net and sheet materials for external use on construction sites. Issue 4.1 dated November 2014
• Requirements for the LPCB approval and listing for fire performance of temporary protective covering materials for use in the interior of buildings. Issue 3.1
• Requirements for the LPCB approval and listing of asset marking systems. Issue 3.2
• Requirements for the LPCB approval and listing of companies carrying out inspection, cleaning and maintenance of ductwork systems. Issue 1.0 dated March 2017
• Requirements for the LPCB approval and listing of companies inspecting, repairing and maintaining fire and security doors, doorsets, shutters and active smoke/fire barriers. Issue 4.2
• Requirements for the LPCB approval and listing of companies installing construction elements used to provide compartmentation in buildings. Issue 2.1
• Requirements for the LPCB approval and listing of companies installing fire and security doors, doorsets, shutters and active smoke/fire barriers. Issue 2.3
• Requirements for the LPCB approval and listing of companies installing or applying passive fire protection products. Issue 1.2
• Requirements for the LPCB approval and listing of fire doorsets, lift landing doors and shutters. Issue 6.2
• Requirements for the LPCB approval and listing of the fire performance of grease filters used in commercial kitchen extract systems. Issue 1.4
• Requirements for the LPCB certification and listing of above ground suction tanks for sprinkler systems. Issue 2.0
• Requirements, tests and methods of assessment of passive fire protection systems for structural steelwork. Issue 1.2
• Security assessment standard for buildings and built infrastructure assets. Issue 1.0 dated March 2017
• Series of fire growth tests for LPCB approval and listing of construction product systems. Part 1: Requirements and tests for built up cladding and sandwich panel systems for use as the external envelope of buildings. Issue 1.2
• Series of fire growth tests for LPCB approval and listing of construction product systems. Part 2: Requirements and tests for sandwich panels and built up systems for use as internal constructions in buildings. Issue 2.1
• Specification for testing and classifying physical protection devices for personal computers and similar equipment. Issue 2.2
• Specification for testing and classifying the burglary resistance of office furniture - lightweight containers. Issue 1.2
• Testing procedures for the LPCB approval and listing of carbon monoxide/heat multisensor fire detectors using electromechanical cells. Issue 1.1
• Testing procedures for the LPCB approval and listing of duct smoke detectors using point smoke detectors. Issue 1.1 dated Jan 2014
• Testing procedures for the LPCB approval and listing of point multisensor fire detectors using optical or ionization smoke sensors and electrochemical cell CO sensors and, optionally, heat sensors. Issue 1.1