Engineering Equipment and Materials Users' Association documents within the Construction Information Service
- A guide to the use of EEMUA 140 Noise procedure specification. Edition 3
- Above ground flat bottomed storage tanks: a guide to inspection maintenance and repair. 5th edition (Including Amendment Sheet 1)
- Above ground plastic tanks: a guide to their specification, installation, commissioning, inspection, maintenance, repair and disposal
- Alarm systems: a guide to design, management and procurement. 4th edition
- Code of practice for the identification and checking of materials of construction in pressure systems in process plants
- Control rooms: a guide to their specification, design, commissioning and operation. Edition 3
- Demolition of vertical cylindrical steel storage tanks and LPG spheres. Edition 3
- Design and installation of on-line analyser systems
- Emission reduction from oil storage tanks and loading operations
- Factory stairways, ladders and handrails (including access platforms and ramps). 8th edition
- Frangible roof joints for fixed roof storage tanks: guide for designers and users. 2nd edition
- Guidance on the presence and operation of portable self-energised electrical/electronic devices in potentially explosive atmospheres (gas and dust)
- Guidance on the specification of pressure vessels. Edition 3
- Guide for establishing operating periods of safety valves. 2nd edition
- Guide for hot tapping on piping and other equipment. Edition 2
- Guide for the design, construction and use of mounded horizontal cylindrical vessels for pressurised storage of LPG at ambient temperatures. Edition 1 (2021 reprint incorporating all amendments and errata to date since original publication)
- Guide to life-cycle management of pressure relief systems
- Guide to mechanical connector selection and lifecycle. 1st edition
- Guide to pressure testing of equipment. Edition 3
- Guide to risk-based procurement: quality assurance of safety-critical engineering equipment and materials
- Guide to the application of IEC 61511 to safety instrumented systems in the UK process industries
- Guide to the isolation of pressure relieving devices. Edition 3
- Guide to the UK Pressure Systems Safety Regulations (2000). Edition 3
- Industrial cooling tower fans and fin fans: guide for design, maintenance and operation
- Lifting points - a design guide. Edition 2
- Liquid ring vacuum pumps and compressors (including 2002 amendment)
- Management of ageing electrical assets
- Mechanical integrity of plant containing hazardous substances. A guide to periodic examination and testing
- Noise procedure specification. Edition 3
- Pressure equipment testing after repair, modifications or re-rating: A guide to the pressure test waiver
- Prevention of tank bottom leakage: A guide for the design and repair of foundations and bottoms of vertical, cylindrical, steel storage tanks
- Proof testing good practice for instrumented protective systems
- Recommendations for refrigerated liquefied gas storage tanks. Edition 3
- Recommendations for tube end welding. Edition 2
- Silencers and acoustic enclosures. A guide to selection and assessment. Edition 2
- Specification for integral block and bleed valve manifolds for direct connection to pipework (incorporating information sheet no.20: application guidelines) (Includes corrigenda issued June 2004). 2nd edition
- Specification for underground armoured cable protected against solvent penetration and corrosive attack. Edition 2
- Specifying, procuring and managing 3rd party inspection services
- UK pressure equipment - pressure equipment (safety) regulations - global conformity assessment: a guide to site installed assemblies
- UK Pressure Equipment. A guide to pressure system installation where site assembly is required under the control of the end user